Digital Photography Made Easy 25/Digital Photography Made Easy Issue 25.iso/pc/Software/Extras/PGE5_Demo.exe/Main/MainStringTable.iqs

Text File | 2002-10-06 | 175.1 KB | 3,021 lines

IQST "Main String table" Version(0.95)

MessageStr(0) "Not Used"

LayerID('MasS') "Masking Set"
LayerID('MasM') "Manual Mask"
LayerID('MasR') "Retract Mask"
LayerID('MasO') "Outline Mask"
LayerID('MasE') "Extract Mask"
LayerID('MasA') "Auto Brush Mask"
LayerID('MasT') "Transition Mask"
LayerID('MasC') "Chroma Mask"
LayerID('MskL') "Selection Mask"
LayerID('TraL') "Transparency Mask"
LayerID('MovL') "Move"
LayerID('AirL') "Air Brush"
LayerID('CloL') "Clone"
LayerID('MelL') "Meld"
LayerID('TrnL') "Transform"
LayerID('TypL') "Type"
LayerID('EypL') "Enhance"
LayerID('PerL') "Perspective"
LayerID('CroL') "Crop"
LayerID('StkL') "Stroke"
LayerID('FilL') "Fill"
LayerID('PutL') "Putty"
LayerID('NewL') "Image Layer"
LayerID('NewP') "New Path"
LayerID('RenL') " rendered"
FileType('AFX ') "AFX (*.AFX)"
FileType('JFX ') "JFX (*.JFX)"
FileType('BMP ') "Bitmap (*.BMP)"
FileType('PSD ') "PhotoShop Project (*.PSD)"
FileType('TIFF') "TIFF (*.TIF)"
FileType('efx ') "ImageQuest Project (*.EFX)"
FileType('GIF ') "GIF (*.GIF)"
FileType('JPEG') "JPEG (*.JPG)"
FileType('PiNG') "PNG (*.PNG)"
FileType('IQPR') "ImageQuest Preferences (*.IQP)"
FileType('IQCS') "ImageQuest Text Links (*.IQC)"
FileType('IQST') "ImageQuest Strings (*.IQS)"
FileType('IQUI') "ImageQuest Style (*.IQU)"
FileType('IQSK') "ImageQuest Skin (*.IQK)"
PenNaming('PLND') "PathNaming"
MessageStr('CloN') "The clone offset has not been set."
MessageStr('CloO') "Click on the image with the ALT key down to set the offset."
MessageStr('FiNS') "Fill has no selection to apply to."
MessageStr('FiNE') "Make a selection and then click on it with the Fill Tool."
MessageStr('SkNS') "Stroke has no selection to apply to."
MessageStr('SkNE') "Make a selection and then click on it with the Stroke Tool."
MessageStr('SeNS') "Selection has no image to apply to."
MessageStr('SeNE') "Load an image and then click on it with the Selection Tool."
MessageStr('DocS') "Do you want to save the changes you have made to "
MessageStr('DocT') ""
MessageStr('FiFE') "Problem reading file"
MessageStr('ReNT') "Cannot render layer"
MessageStr('ReNP') "The layer has no pixels"
MessageStr('Gi01') "Failed to open given file"
MessageStr('Gi02') "Failed to Write to given file"
MessageStr('Gi03') "Screen Descriptor already been set"
MessageStr('Gi04') "Image Descriptor is still active"
MessageStr('Gi05') "Neither Global Nor Local color map"
MessageStr('Gi06') "#Pixels bigger than Width * Height"
MessageStr('Gi07') "Fail to allocate required memory"
MessageStr('Gi08') "Write failed (disk full?)"
MessageStr('Gi09') "Failed to close given file"
MessageStr('Gi10') "Given file was not opened for write"
MessageStr('Gi11') "Failed to open given file"
MessageStr('Gi12') "Failed to Read from given file"
MessageStr('Gi13') "Given file is NOT GIF file"
MessageStr('Gi14') "No Screen Descriptor detected"
MessageStr('Gi15') "No Image Descriptor detected"
MessageStr('Gi16') "Neither Global Nor Local color map"
MessageStr('Gi17') "Wrong record type detected"
MessageStr('Gi18') "#Pixels bigger than Width * Height"
MessageStr('Gi19') "Fail to allocate required memory"
MessageStr('Gi20') "Failed to close given file"
MessageStr('Gi21') "Given file was not opened for read"
MessageStr('Gi22') "Image is defective, decoding aborted"
MessageStr('Gi23') "Image EOF detected, before image complete"
MessageStr('Gi24') "GIF Frame is outside the image area"
MessageStr('Gi25') "Unknown error"
EffectTypeName('Efft') "Effect"
EffectGroupName('ColG') "Color"
EffectGroupName('FraG') "Framing"
EffectTypeName('ESpl') "Split Frame"
EffectGroupName('GSpl') "DreamSuite 2"
EffectTypeName('EBlr') "Blur"
EffectGroupName('GBlr') "Texture"
EffectTypeName('EEdg') "Edge Detect"
EffectGroupName('GEdg') "Texture"
EffectTypeName('ECha') "Channels"
EffectGroupName('GCha') "Texture"
EffectTypeName('EAln') "Alien Map"
EffectGroupName('GAln') "Texture"
EffectTypeName('EAna') "Anamorphose"
EffectGroupName('GAna') "Texture"
EffectTypeName('ECtn') "Cartoon"
EffectGroupName('GCtn') "Texture"
EffectTypeName('EBkl') "Backlight"
EffectGroupName('GBkl') "DreamSuite 3"
EffectTypeName('EChs') "Chisel"
EffectGroupName('GChs') "DreamSuite 1"
EffectTypeName('ECrk') "Crackle"
EffectGroupName('GCrk') "DreamSuite 1"
EffectTypeName('ECrs') "Crease"
EffectGroupName('GCrs') "DreamSuite 1"
EffectTypeName('ECub') "Cubism"
EffectGroupName('GCub') "DreamSuite 1"
EffectTypeName('ECur') "Curl"
EffectGroupName('GCur') "DreamSuite 2"
EffectTypeName('EDkl') "Deckle"
EffectGroupName('GDkl') "DreamSuite 1"
EffectTypeName('EDim') "DimensionX"
EffectGroupName('GDim') "DreamSuite 1"
EffectTypeName('EMet') "LiquidMetal"
EffectGroupName('GMet') "DreamSuite 1"
EffectTypeName('EBiM') "MetalMixer"
EffectGroupName('GBiM') "DreamSuite 1"
EffectTypeName('GEiM') "GelMixer"
EffectGroupName('GMiM') "DreamSuite Gel"
EffectTypeName('ECry') "LiquidCrystal"
EffectGroupName('GCry') "DreamSuite Gel"
EffectTypeName('EPry') "CrystalPainter"
EffectGroupName('GPry') "DreamSuite Gel"
EffectTypeName('EGel') "Gel"
EffectGroupName('GGel') "DreamSuite Gel"
EffectTypeName('EGEl') "GelPainter"
EffectGroupName('GGEl') "DreamSuite Gel"
EffectTypeName('EDre') "Dreamy Photo"
EffectGroupName('GDre') "DreamSuite 2"
EffectTypeName('EDou') "DoubleExposure"
EffectGroupName('GDou') "DreamSuite 3"
EffectTypeName('EFlr') "Flare"
EffectGroupName('GFlr') "DreamSuite 2"
EffectTypeName('EFoc') "Focus"
EffectGroupName('GFoc') "DreamSuite 1"
EffectTypeName('EHol') "Hole"
EffectGroupName('GHol') "DreamSuite 3"
EffectTypeName('ECar') "Carve"
EffectGroupName('GCar') "DreamSuite 2"
EffectTypeName('ECut') "Cutout"
EffectGroupName('GCut') "DreamSuite 2"
EffectTypeName('EExt') "Extrude"
EffectGroupName('GExt') "DreamSuite 2"
EffectTypeName('EFil') "Fill"
EffectGroupName('GFil') "Texture"
EffectTypeName('EFlm') "FilmStrip"
EffectGroupName('GFlm') "DreamSuite 2"
EffectTypeName('EPuz') "Puzzle"
EffectGroupName('GPuz') "DreamSuite 2"
EffectTypeName('EGwl') "Glowing Lines"
EffectGroupName('GGwl') "Lighting"
EffectTypeName('EGrn') "Grain"
EffectGroupName('GGrn') "Texture"
EffectTypeName('EHst') "HotStamp"
EffectGroupName('GHst') "DreamSuite 1"
EffectTypeName('EInf') "Inferno"
EffectGroupName('GInf') "DreamSuite 2"
EffectTypeName('EAli') "AlienSkin"
EffectGroupName('GAli') "DreamSuite 3"
EffectTypeName('ELgt') "Lightning"
EffectGroupName('GLgt') "DreamSuite 4"
EffectTypeName('EMsh') "Mesh"
EffectGroupName('GMsh') "DreamSuite 2"
EffectTypeName('ESti') "PhotoStrips"
EffectGroupName('GSti') "DreamSuite 2"
EffectTypeName('EMsc') "Mosaic"
EffectGroupName('GMsc') "DreamSuite 2"
EffectTypeName('EMud') "MudCracks"
EffectGroupName('GMud') "DreamSuite 1"
EffectTypeName('EPhc') "Photo Cube"
EffectGroupName('GPhc') "DreamSuite 3"
EffectTypeName('EPhd') "PhotoDepth"
EffectGroupName('GPhd') "DreamSuite 1"
EffectTypeName('EPhm') "Photometric"
EffectGroupName('GPhm') "Color Adjustment"
EffectTypeName('EPrs') "PhotoPress"
EffectGroupName('GPrs') "DreamSuite 2"
EffectTypeName('EPhp') "PhotoPusher"
EffectGroupName('GPhp') "DreamSuite 2"
EffectTypeName('EPhs') "Photo Stack"
EffectGroupName('GPhs') "Montage"
EffectTypeName('E35s') "35mm Frame"
EffectGroupName('G35s') "DreamSuite 1"
EffectTypeName('EIns') "Instamatic Frame"
EffectGroupName('GIns') "DreamSuite 1"
EffectTypeName('EPBs') "PhotoBorder"
EffectGroupName('GPBs') "DreamSuite 1"
EffectTypeName('EPlw') "Plastic Wrap"
EffectGroupName('GPlw') "DreamSuite 2"
EffectTypeName('EPut') "Putty"
EffectGroupName('GPut') "DreamSuite 1"
EffectTypeName('ERpl') "Ripple"
EffectGroupName('GRpl') "DreamSuite 1"
EffectTypeName('ESha') "Shake"
EffectGroupName('GSha') "DreamSuite 2"
EffectTypeName('ESmo') "Smoke"
EffectGroupName('GSmo') "DreamSuite 2"
EffectTypeName('ESpg') "SpectralGlow"
EffectGroupName('GSpg') "DreamSuite 3"
EffectTypeName('ESph') "Sphere"
EffectGroupName('GSph') "DreamSuite 3"
EffectTypeName('EStn') "Stencil"
EffectGroupName('GStn') "DreamSuite 3"
EffectTypeName('EStr') "Streak"
EffectGroupName('GStr') "DreamSuite 2"
EffectTypeName('ESta') "Staple"
EffectGroupName('GSta') "DreamSuite 2"
EffectTypeName('ETap') "Tape"
EffectGroupName('GTap') "DreamSuite 1"
EffectTypeName('ETea') "Tear"
EffectGroupName('GTea') "DreamSuite 4"
EffectTypeName('EPee') "PeelingPaper"
EffectGroupName('GPee') "DreamSuite 3"
EffectTypeName('ETil') "Tile"
EffectGroupName('GTil') "DreamSuite 2"
EffectTypeName('ETon') "PhotoTone"
EffectGroupName('GTon') "DreamSuite 1"
EffectTypeName('ETra') "Transfer"
EffectGroupName('GTra') "Montage"
EffectTypeName('EWri') "Wrinkle"
EffectGroupName('GWri') "DreamSuite 2"
EffectTypeName('RerP') "Effect Template"
EffectGroupName('RTrP') "DreamSuite 1"
EffectTypeName('PgeE') "Edges"
EffectGroupName('GpgR') "PhotoGraphic "
EffectTypeName('PgeD') "Montage"
EffectGroupName('GDgR') "PhotoGraphic "
EffectTypeName('Pgef') "Vignette"
EffectGroupName('GVgR') "PhotoGraphic "
EffectTypeName('PgeR') "Frames"
EffectGroupName('GFgR') "PhotoGraphic "
EffectTypeName('Auto') "AutoEye"
EffectGroupName('Gaut') "AutoEye "
MessageStr('1001') "View Transparent Background"
MessageStr('1002') "Cancel"
MessageStr('1003') "OK"
MessageStr('1004') "File"
MessageStr('1005') "Load a Mask"
MessageStr('1006') "Save"
MessageStr('1007') "Exit"
MessageStr('1008') "File"
MessageStr('1009') "Open"
MessageStr('1010') "Load a Mask"
MessageStr('1012') "Edit"
MessageStr('1013') "Bring to Front"
MessageStr('1014') "Send to Back"
MessageStr('1015') "Inverse Selection"
MessageStr('1016') "Clear Selection"
MessageStr('1017') "Preferences"
MessageStr('1018') "Check for Updates"
MessageStr('1019') "View"
MessageStr('1020') "Fit in Window"
MessageStr('1021') "Browser Dimension (1:1)"
MessageStr('1022') "Zoom In"
MessageStr('1023') "Zoom Out"
MessageStr('1024') "Hide Selection Lines"
MessageStr('1025') "View White Background"
MessageStr('1026') "View Black Background"
MessageStr('1027') "View Color Background"
MessageStr('1028') "Select View Color"
MessageStr('1029') "Revert"
MessageStr('1030') "Render"
MessageStr('1031') "Special Effects"
MessageStr('9911') "PhotoGraphic"
MessageStr('1032') "Save"
MessageStr('1033') "Remove"
MessageStr('1034') "Cancel"
MessageStr('1035') "OK"
MessageStr('1036') "File"
MessageStr('1037') "Exit"
MessageStr('1038') "Load Image"
MessageStr('1039') "Load Mask"
MessageStr('1040') "Edit"
MessageStr('1041') "Undo"
MessageStr('1042') "Redo"
MessageStr('1043') "Invert Mask"
MessageStr('1044') "Clear Mask"
MessageStr('1045') "View"
MessageStr('1046') "Fit in Window"
MessageStr('1047') "Browser Dimension (1:1)"
MessageStr('1048') "Zoom In"
MessageStr('1049') "Zoom Out"
MessageStr('1050') "View Transparent"
MessageStr('1051') "View Marching Ants"
MessageStr('1052') "View Image Only"
MessageStr('1053') "View White"
MessageStr('1054') "Select Mask Color"
MessageStr('1055') "View Color"
MessageStr('1056') "Special Effects"
MessageStr('1057') "Save"
MessageStr('1058') "Remove"
MessageStr('1059') "Target Current Layer"
MessageStr('1060') "Target Keyword Group"
MessageStr('1061') "Target Layer Group"
MessageStr('1062') "Target Bezier Path"
MessageStr('1063') "Choose a Special Effect"
MessageStr('1064') "Target Current Layer"
MessageStr('1065') " "
MessageStr('1066') "0"
MessageStr('1067') "View"
MessageStr('1068') "Load Image..."
MessageStr('1069') "Transparent"
MessageStr('1070') "Opacity"
MessageStr('1071') "Feather"
MessageStr('1072') "Size"
MessageStr('1073') "Custom Map..."
MessageStr('1074') "Aurora"
MessageStr('1075') "Blue Streaks"
MessageStr('1076') "Blue Waves"
MessageStr('1077') "Cloudscape"
MessageStr('1078') "Coal"
MessageStr('1079') "Cork"
MessageStr('1080') "Etheral Streaks"
MessageStr('1081') "Etheral"
MessageStr('1082') "Feathers"
MessageStr('1083') "Golden Rules"
MessageStr('1084') "Gray Waves"
MessageStr('1085') "Green Cones"
MessageStr('1086') "Grooves"
MessageStr('1087') "Harvest"
MessageStr('1088') "Marbled 2"
MessageStr('1089') "Marbled 3"
MessageStr('1091') "Marbled"
MessageStr('1092') "Painted"
MessageStr('1093') "Parchment"
MessageStr('1094') "Purple Grooves"
MessageStr('1095') "Rain"
MessageStr('1096') "Rainbow Dream"
MessageStr('1097') "Rake"
MessageStr('1098') "Ripples"
MessageStr('1099') "Ripples 2"
MessageStr('1100') "Ripples 3"
MessageStr('1101') "Sharkskin"
MessageStr('1102') "Silver Fibers"
MessageStr('1103') "Spiral"
MessageStr('1104') "Swirls"
MessageStr('1105') "Weave"
MessageStr('1106') "Woven"
MessageStr('1107') "Custom Map..."
MessageStr('1108') "Chrome"
MessageStr('1109') "Gold"
MessageStr('1110') "Steel"
MessageStr('1111') "Graphite"
MessageStr('1112') "Silver"
MessageStr('1113') "Molten Gold"
MessageStr('1114') "BlueNoise"
MessageStr('1115') "BlueSilk"
MessageStr('1116') "ColorRibbons"
MessageStr('1117') "ColorTwirl"
MessageStr('1118') "CoolGray"
MessageStr('1119') "CrabClaw"
MessageStr('1120') "Etheral"
MessageStr('1121') "GoldenCurls"
MessageStr('1122') "JungleGreen"
MessageStr('1123') "MetalGrooves"
MessageStr('1124') "PurpleDawn"
MessageStr('1125') "PurpleHaze"
MessageStr('1126') "Rainbow"
MessageStr('1127') "Ripples"
MessageStr('1128') "SharkFin"
MessageStr('1129') "SilverCurls"
MessageStr('1130') "TinFoil"
MessageStr('1131') "Custom Map..."
MessageStr('1132') "Chrome"
MessageStr('1133') "Gold"
MessageStr('1134') "Steel"
MessageStr('1135') "Graphite"
MessageStr('1136') "Silver"
MessageStr('1137') "BlueNoise"
MessageStr('1138') "BlueSilk"
MessageStr('1139') "ColorRibbons"
MessageStr('1140') "ColorTwirl"
MessageStr('1141') "CoolGray"
MessageStr('1142') "CrabClaw"
MessageStr('1143') "Etheral"
MessageStr('1144') "GoldenCurls"
MessageStr('1145') "JungleGreen"
MessageStr('1146') "MetalGrooves"
MessageStr('1147') "PurpleDawn"
MessageStr('1148') "PurpleHaze"
MessageStr('1149') "Rainbow"
MessageStr('1150') "RainbowSherbert"
MessageStr('1151') "Ripples"
MessageStr('1152') "SharkFin"
MessageStr('1153') "SilverCurls"
MessageStr('1154') "TinFoil"
MessageStr('1155') "Custom Map..."
MessageStr('1156') "Chrome"
MessageStr('1157') "Gold"
MessageStr('1158') "Steel"
MessageStr('1159') "Graphite"
MessageStr('1160') "Silver"
MessageStr('1161') "BlueNoise"
MessageStr('1162') "BlueSilk"
MessageStr('1163') "ColorRibbons"
MessageStr('1164') "ColorTwirl"
MessageStr('1165') "CoolGray"
MessageStr('1166') "CrabClaw"
MessageStr('1167') "Etheral"
MessageStr('1168') "GoldenCurls"
MessageStr('1169') "JungleGreen"
MessageStr('1170') "MetalGrooves"
MessageStr('1171') "PurpleDawn"
MessageStr('1172') "PurpleHaze"
MessageStr('1173') "Rainbow"
MessageStr('1174') "RainbowSherbert"
MessageStr('1175') "Ripples"
MessageStr('1187') "SharkFin"
MessageStr('1176') "SilverCurls"
MessageStr('1177') "TinFoil"
MessageStr('1178') "Custom Map..."
MessageStr('1179') "None"
MessageStr('1180') "Dimpled"
MessageStr('1181') "Striated"
MessageStr('1182') "Cloth"
MessageStr('1183') "Asphalt"
MessageStr('1184') "Brain Coral"
MessageStr('1185') "Canvas"
MessageStr('1186') "Chilly Bumps"
MessageStr('1188') "Concrete"
MessageStr('1189') "Egg Shell"
MessageStr('1190') "Fibers"
MessageStr('1191') "Flecks"
MessageStr('1192') "Goose Bumps"
MessageStr('1193') "Linen Crest"
MessageStr('1194') "Linen Fibers"
MessageStr('1195') "Lunar Surface"
MessageStr('1196') "Metal Mesh"
MessageStr('1197') "Microscopic"
MessageStr('1198') "Natural Stone"
MessageStr('1199') "Natural Texture"
MessageStr('1200') "Natural Wall"
MessageStr('1201') "Paper Weaves"
MessageStr('1202') "Parchment"
MessageStr('1203') "Rice Paper"
MessageStr('1204') "Shark Skin"
MessageStr('1205') "Streaking Noise"
MessageStr('1206') "Stucco"
MessageStr('1207') "Textile"
MessageStr('1208') "Tiny Dots"
MessageStr('1209') "Tree Bark"
MessageStr('1210') "Tweed"
MessageStr('1211') "Water Drops"
MessageStr('1212') "Water Reflections"
MessageStr('1213') "Weave"
MessageStr('1214') "Custom Map..."
MessageStr('1215') "None"
MessageStr('1216') "Custom Map..."
MessageStr('1217') "Ball 1"
MessageStr('1218') "Ball 2"
MessageStr('1219') "Ball 3"
MessageStr('1220') "Chrome 1"
MessageStr('1221') "Chrome 2"
MessageStr('1222') "Chrome 3"
MessageStr('1223') "Chrome 4"
MessageStr('1224') "Chrome 5"
MessageStr('1225') "Chrome 6"
MessageStr('1226') "Foil 1"
MessageStr('1227') "Foil 2"
MessageStr('1228') "Foil 3"
MessageStr('1229') "Foil 4"
MessageStr('1230') "Foil 5"
MessageStr('1231') "Foil 6"
MessageStr('1232') "Glare 1"
MessageStr('1233') "Reflection 1"
MessageStr('1234') "Shutters 1"
MessageStr('1235') "Shutters 2"
MessageStr('1236') "Shutters 3"
MessageStr('1237') "Starburst 1"
MessageStr('1238') "Starburst 2"
MessageStr('1239') "GIF"
MessageStr('1240') "Progressive"
MessageStr('1241') "Normal"
MessageStr('1242') "OK"
MessageStr('1243') "TIF"
MessageStr('1244') "LZW Compression"
MessageStr('1245') "PNG"
MessageStr('1246') "JPEG"
MessageStr('1247') "Original File Size"
MessageStr('1248') "105.5K"
MessageStr('1249') "Compressed File Size"
MessageStr('1250') "12.000K"
MessageStr('1251') "Progressive"
MessageStr('1252') "Normal"
MessageStr('1253') " "
MessageStr('1254') "Serial Number"
MessageStr('1255') "Name"
MessageStr('1256') "Company"
MessageStr('1257') "Serial Number"
MessageStr('1258') "Cancel"
MessageStr('1259') "Register"
MessageStr('1260') "Would you like to register "
MessageStr('2361') "online? Please make"
MessageStr('1261') " sure you are connected."
MessageStr('1262') "Skip"
MessageStr('1263') "Save Preset"
MessageStr('1264') "Cancel"
MessageStr('1265') "Preferences"
MessageStr('1266') "General"
MessageStr('1267') "Flavors"
MessageStr('1268') "Textures"
MessageStr('1269') "Colors"
MessageStr('1270') "Proxy"
MessageStr('1271') "Show Tool Tips"
MessageStr('1272') "Render Button"
MessageStr('1273') "Delayed Render"
MessageStr('1274') "OK"
MessageStr('1275') "Cancel"
MessageStr('1276') "Select Disc"
MessageStr('1277') "List Folders"
MessageStr('1278') "Thumbnails"
MessageStr('1279') "Edge History"
MessageStr('1280') "Edge History"
MessageStr('1281') "Edge History"
MessageStr('1282') "Edge History"
MessageStr('1283') "Edge History"
MessageStr('1284') "Edge History"
MessageStr('1285') "Edge History"
MessageStr('1286') " "
MessageStr('1287') "Alert"
MessageStr('1288') "Alert: The serial number entered is"
MessageStr('1289') "invalid. Please re-enter the number."
MessageStr('1290') "Alert: Name is Required."
MessageStr('1291') "Please enter your Name."
MessageStr('1292') "Remove"
MessageStr('1293') "Group Name"
MessageStr('1294') "Group Name"
MessageStr('1295') "Auto Streak"
MessageStr('1296') "Reset"
MessageStr('1297') "Confine to Mask"
MessageStr('1298') "Color Blending"
MessageStr('1299') "Streak Image Color"
MessageStr('1300') "Motion Direction"
MessageStr('1301') "Conform All Paths"
MessageStr('1302') "Make Global Changes"
MessageStr('1303') "Reflection:Chrome"
MessageStr('1304') "Texture:Striated"
MessageStr('1305') "Environment:Ball 1"
MessageStr('1306') "Texture Map:None"
MessageStr('1307') "Surface Texture"
MessageStr('1308') "Texture Size"
MessageStr('1309') "Switch Direction"
MessageStr('1310') "Auto Tile"
MessageStr('1311') "Clear"
MessageStr('1312') "Triangles"
MessageStr('1313') "Squares"
MessageStr('1314') "Rectangles"
MessageStr('1315') "Circles"
MessageStr('1316') "Make Global Changes"
MessageStr('1317') "Reflection: Chrome"
MessageStr('1318') "Texture:Striated"
MessageStr('1319') "Pre-wrinkle"
MessageStr('1320') "Texture:None"
MessageStr('1321') "Environment:Ball 1"
MessageStr('1322') "Texture Map:None"
MessageStr('1323') "Apply Background"
MessageStr('1324') "Shield Transparency"
MessageStr('1325') "Reflection:Chrome"
MessageStr('1326') "Vertical Frames"
MessageStr('1327') "Apply Background Image"
MessageStr('1328') "Texture: Dimpled"
MessageStr('1329') "Inner Glow"
MessageStr('1330') "Outer Glow"
MessageStr('1331') "Create Snaps"
MessageStr('1332') "Auto Tile"
MessageStr('1333') "Clear"
MessageStr('1334') "Photometric Adjustment"
MessageStr('1335') "Brightness"
MessageStr('1336') " "
MessageStr('1337') "Contrast"
MessageStr('1338') "Gamma"
MessageStr('1339') "Global Slider Changes"
MessageStr('1340') "Illuminate Photo"
MessageStr('1341') "Shield Transparency"
MessageStr('1342') "Texture: Dimpled"
MessageStr('1343') "Border: Straight"
MessageStr('1344') "Straight"
MessageStr('1345') "Wavey"
MessageStr('1346') "Deckled"
MessageStr('1347') "Zig Zag"
MessageStr('1348') "Blade"
MessageStr('1349') "Bumpy Slide"
MessageStr('1350') "Crest 1"
MessageStr('1351') "Crest 2"
MessageStr('1352') "Double Bump"
MessageStr('1353') "Downhill Hump"
MessageStr('1354') "Fin"
MessageStr('1355') "Gear Tracks"
MessageStr('1356') "Humps"
MessageStr('1357') "Jagged Peak 1"
MessageStr('1358') "Jagged Peak 2"
MessageStr('1359') "Jagged Peak 3"
MessageStr('1360') "Mountain Top"
MessageStr('1361') "Postage Stamp"
MessageStr('1362') "Rolling Waves"
MessageStr('1363') "Semi-Circle"
MessageStr('1364') "Swag"
MessageStr('1365') "Top Hat"
MessageStr('1366') "Shield Transparency"
MessageStr('1367') "Illuminate Photo"
MessageStr('1368') "Texture: None"
MessageStr('1369') "Apply Background Image"
MessageStr('1370') "Load Picture 2"
MessageStr('1371') "Make Global Changes"
MessageStr('1372') "Texture: Striated"
MessageStr('1373') "Pre-wrap"
MessageStr('1374') "Switch Direction"
MessageStr('1375') "Select Edge Effect"
MessageStr('1376') "Select Frame Effect"
MessageStr('1377') "Balance Shading"
MessageStr('1378') "Link Lighting to Shadow"
MessageStr('1379') "Display Shadows"
MessageStr('1380') "Peel To Undercoat"
MessageStr('1381') "Smooth Surface"
MessageStr('1382') "Anti-alias"
MessageStr('1383') "Average Color"
MessageStr('1384') "Confine to Selection"
MessageStr('1385') "Apply Background Image"
MessageStr('1386') "Reflection: Chrome"
MessageStr('1387') "Environment: Ball 1"
MessageStr('1388') "Texture Map: None"
MessageStr('1389') "Chrome"
MessageStr('1390') "Load Picture 2"
MessageStr('1391') "Texture: Striated"
MessageStr('1392') "Auto Fill"
MessageStr('1393') "Clear"
MessageStr('1394') "Reflection: Molten Gold"
MessageStr('1395') "New Metal..."
MessageStr('1396') "Glow Offset"
MessageStr('1397') "Apply Background"
MessageStr('1398') "Apply Mask"
MessageStr('1399') "Shade Surface"
MessageStr('1400') "Reflection: Chrome"
MessageStr('1401') "Invert"
MessageStr('1402') "Motion Direction"
MessageStr('1403') "Apply to Mask"
MessageStr('1404') "Follow Mask Outline"
MessageStr('1405') "Crop to Mask"
MessageStr('1406') "Checkbox 1"
MessageStr('1407') "Checkbox 2"
MessageStr('1408') "Vertical Frames"
MessageStr('1409') "Texture: Dimpled"
MessageStr('1410') "Flake Shows Imprint"
MessageStr('1411') "Draw Straight Line"
MessageStr('1412') "Transparent Shapes"
MessageStr('1413') "Constrain To Selection"
MessageStr('1414') "Switch Direction"
MessageStr('1415') "Cut Length"
MessageStr('1416') "Types"
MessageStr('1417') "Gaussian Blur"
MessageStr('1418') "Zoom Blur"
MessageStr('1419') "Radius"
MessageStr('1420') " "
MessageStr('1421') "Amount"
MessageStr('1422') "Sharpen"
MessageStr('1423') "Blur Mask"
MessageStr('1424') "Deckle Mask Selection"
MessageStr('1425') "Inside"
MessageStr('1426') "Outside"
MessageStr('1427') "Deckle Color Blending"
MessageStr('1428') "Create Snaps"
MessageStr('1429') "Adhesive"
MessageStr('1430') "Bandage"
MessageStr('1431') "Cloth"
MessageStr('1432') "Masking"
MessageStr('1433') "Main Color"
MessageStr('1434') "Texture"
MessageStr('1435') "Opacity"
MessageStr('1436') "Dirt"
MessageStr('1437') "Age"
MessageStr('1438') "AntiAlias"
MessageStr('1439') "Tear"
MessageStr('1440') "Wrinkle"
MessageStr('1441') "Serration"
MessageStr('1442') "2"
MessageStr('1443') "Seed"
MessageStr('1444') "Main Color"
MessageStr('1445') "Texture"
MessageStr('1446') "Serration"
MessageStr('1447') "Spectral Glow"
MessageStr('1448') "Presets"
MessageStr('1449') "Save Preset"
MessageStr('1450') "Edit Presets"
MessageStr('1451') "Preset Pull-Out Window"
MessageStr('1452') "Preset Floating Window"
MessageStr('1453') "Purple and Blue Glow"
MessageStr('1454') "Red and Orange Fire Glow"
MessageStr('1455') "White Glow and Wisps"
MessageStr('1456') "Bevel In"
MessageStr('1457') "Polish Lip"
MessageStr('1458') "Radius"
MessageStr('1459') "Group Name"
MessageStr('1460') "Texture: None"
MessageStr('1461') "None"
MessageStr('1462') "Angled"
MessageStr('1463') "Bead"
MessageStr('1464') "Blade"
MessageStr('1465') "Carved"
MessageStr('1466') "Cornice"
MessageStr('1467') "Facet"
MessageStr('1468') "Framed"
MessageStr('1469') "Hammered"
MessageStr('1470') "Lip"
MessageStr('1471') "Molded"
MessageStr('1472') "Round"
MessageStr('1473') "Normal"
MessageStr('1474') "Rotate 90"
MessageStr('1475') "Rotate 180"
MessageStr('1476') "Rotate 270"
MessageStr('1477') "Flip Horz."
MessageStr('1478') "Flip Vert."
MessageStr('1479') "Color"
MessageStr('1480') "Texture"
MessageStr('1481') "Feather Effect"
MessageStr('1482') "Background"
MessageStr('1483') "Photo"
MessageStr('1484') "Frame"
MessageStr('1485') "Unchanged"
MessageStr('1486') "4"
MessageStr('1487') "8"
MessageStr('1488') "16"
MessageStr('1489') "32"
MessageStr('1490') "64"
MessageStr('1491') "128"
MessageStr('1492') "256"
MessageStr('1493') "8 bit"
MessageStr('1494') "16 bit"
MessageStr('1495') "32 bit"
MessageStr('1496') "No Delay"
MessageStr('1497') "1 seconds"
MessageStr('1498') "2 seconds"
MessageStr('1499') "4 Seconds"
MessageStr('1501') "6 seconds"
MessageStr('1502') "8 seconds"
MessageStr('1503') "Outer"
MessageStr('1504') "Inner"
MessageStr('1505') "Multipy"
MessageStr('1506') "Add"
MessageStr('1507') "Overlay"
MessageStr('1508') "None"
MessageStr('1509') "Load"
MessageStr('1510') "Edge Effect"
MessageStr('1511') "Background"
MessageStr('1512') "Blades"
MessageStr('1513') "Dots"
MessageStr('1514') "Etched"
MessageStr('1515') "Gate"
MessageStr('1516') "Glass Cutter"
MessageStr('1517') "Grid"
MessageStr('1518') "Hairy"
MessageStr('1519') "Lines"
MessageStr('1520') "Marbled"
MessageStr('1521') "Patch"
MessageStr('1522') "Roughen"
MessageStr('1523') "Spots"
MessageStr('1524') "Edge Effect"
MessageStr('1525') "Background"
MessageStr('1526') "Ellipse"
MessageStr('1527') "Square"
MessageStr('1528') "Triangle"
MessageStr('1529') "Starburst"
MessageStr('1530') "Wispy Smoke"
MessageStr('1531') "Paper Smoke"
MessageStr('1532') "Steam"
MessageStr('1533') "Wood Smok"
MessageStr('1534') "Squares"
MessageStr('1535') "Triangles"
MessageStr('1536') "Pentagons"
MessageStr('1537') "Hexagons"
MessageStr('1538') "Upward"
MessageStr('1539') "Downward"
MessageStr('1540') "Paint Cracks"
MessageStr('1541') "Mud Cracks"
MessageStr('1542') "Inside"
MessageStr('1543') "Outside"
MessageStr('1544') "1.33 35MM Frame"
MessageStr('1545') "1.66 35MM Frame"
MessageStr('1546') ".85 35MM Frame"
MessageStr('1547') "2.35 Panavision Frame"
MessageStr('1548') "2.2 70MM Frame"
MessageStr('1549') "70MM Anamorphic Frame"
MessageStr('1550') "Soft Blur"
MessageStr('1551') "Zoom Blur"
MessageStr('1552') "Rotation Blur"
MessageStr('1553') "Directional Blur"
MessageStr('1554') "Speckle Blur"

MessageStr('1558') "Fork Lightning"
MessageStr('1559') "Ball Lightning"
MessageStr('1560') "Sheet Lightning"
MessageStr('1561') "Fire"
MessageStr('1562') "Lightning"
MessageStr('1563') "Radial"
MessageStr('1564') "Solar"
MessageStr('1565') "Streaks"
MessageStr('1566') "Tile Type: Square"
MessageStr('1567') "Tile Type: Hexagon"
MessageStr('1568') "Tile Type: Octagon"
MessageStr('1569') "Metal 1"
MessageStr('1570') "Metal 2"
MessageStr('1571') "Starburst 2"
MessageStr('1572') "Edge Effect"
MessageStr('1573') "None"
MessageStr('1574') "Load"
MessageStr('1575') "Single"
MessageStr('1576') "Fan 3"
MessageStr('1577') "Fan 4"
MessageStr('1578') "Fan 5"
MessageStr('1579') "Corners"
MessageStr('1580') "Vertical Strips"
MessageStr('1581') "Horizontal Strips"
MessageStr('1582') "Background"
MessageStr('1583') "Style:Wrinkle"
MessageStr('1584') "Style:Overlap"
MessageStr('1585') "Style:Flaps"
MessageStr('1586') "Style:Transparent"
MessageStr('1587') "Style:Sports Tape"
MessageStr('1588') "Style:Masking"
MessageStr('1589') "Style:Cloth"
MessageStr('1590') "Circular"
MessageStr('1591') "Linear"
MessageStr('1592') "Random"
MessageStr('1593') "Smooth"
MessageStr('1594') "Peaked"
MessageStr('1595') "Outward"
MessageStr('1596') "Inward"
MessageStr('1597') "Style:Blurred"
MessageStr('1598') "Style:Central"
MessageStr('1599') "Style:Vibrate"
MessageStr('1600') "Style:Ghosted"
MessageStr('1601') "Duct"
MessageStr('1602') "Masking"
MessageStr('1603') "Sports"
MessageStr('1604') "Transparent"
MessageStr('1605') "Standard"
MessageStr('1606') "Standard Reversed"
MessageStr('1607') "Heavy Duty"
MessageStr('1608') "Heavy Duty Reversed"
MessageStr('1609') "Carpenter"
MessageStr('1610') "Square"
MessageStr('1611') "Rectangle"
MessageStr('1612') "Circle"
MessageStr('1613') "Flare"
MessageStr('1614') "Wispy"
MessageStr('1615') "Aura"
MessageStr('1616') "Radial"
MessageStr('1617') "Fire"
MessageStr('1618') "Wispy Smoke"
MessageStr('1619') "Paper Smoke"
MessageStr('1620') "Steam"
MessageStr('1621') "Wood Smoke"
MessageStr('1622') "Triangle"
MessageStr('1623') "Square"
MessageStr('1624') "Rectangle"
MessageStr('1625') "Circle"
MessageStr('1626') "None"
MessageStr('1627') "None"
MessageStr('1628') "Dimpled"
MessageStr('1629') "Striated"
MessageStr('1630') "Cloth"
MessageStr('1631') "Asphalt"
MessageStr('1632') "Brain Cora"
MessageStr('1633') "Canvas"
MessageStr('1634') "Chilly Bumps"
MessageStr('1635') "Concrete"
MessageStr('1636') "Egg Shell"
MessageStr('1637') "Fibers"
MessageStr('1638') "Flecks"
MessageStr('1639') "Goose Bumps"
MessageStr('1640') "Linen Crest"
MessageStr('1641') "Linen Fibers"
MessageStr('1642') "Lunar Surface"
MessageStr('1643') "Metal Mesh"
MessageStr('1644') "Microscopic"
MessageStr('1645') "Natural Stone"
MessageStr('1646') "Natural Texture"
MessageStr('1647') "Natural Wall"
MessageStr('1648') "Paper Weaves"
MessageStr('1649') "Parchment"
MessageStr('1650') "Rice Paper"
MessageStr('1651') "Shark Skin"
MessageStr('1652') "Streaking Noise"
MessageStr('1653') "Stucco"
MessageStr('1654') "Textile"
MessageStr('1655') "Tiny Dots"
MessageStr('1656') "Tree Bark"
MessageStr('1657') "Tweed"
MessageStr('1658') "Water Drops"
MessageStr('1659') "Water Reflections"
MessageStr('1660') "Weave"
MessageStr('1661') "Ball 1"
MessageStr('1662') "Ball 2"
MessageStr('1663') "Ball 3"
MessageStr('1664') "Chrome 1"
MessageStr('1665') "Chrome 2"
MessageStr('1666') "Chrome 3"
MessageStr('1667') "Chrome 4"
MessageStr('1668') "Chrome 5"
MessageStr('1669') "Chrome 6"
MessageStr('1670') "Foil 1"
MessageStr('1671') "Foil 2"
MessageStr('1672') "Foil 3"
MessageStr('1673') "Foil 4"
MessageStr('1674') "Foil 5"
MessageStr('1675') "Foil 6"
MessageStr('1676') "Glare 1"
MessageStr('1677') "Reflection 1"
MessageStr('1678') "Shutters 1"
MessageStr('1679') "Shutters 2"
MessageStr('1680') "Shutters 3"
MessageStr('1681') "Starburst 1"
MessageStr('1682') "Starburst 2"
MessageStr('1683') "None"
MessageStr('1684') "Chrome"
MessageStr('1685') "Gold"
MessageStr('1686') "Steel"
MessageStr('1687') "Graphite"
MessageStr('1688') "Silver"
MessageStr('1689') "BlueNoise"
MessageStr('1690') "BlueSilk"
MessageStr('1691') "ColorRibbons"
MessageStr('1692') "ColorTwirl"
MessageStr('1693') "CoolGray"
MessageStr('1694') "CrabClaw"
MessageStr('1695') "Etheral"
MessageStr('1696') "GoldenCurls"
MessageStr('1697') "JungleGreen"
MessageStr('1698') "MetalGrooves"
MessageStr('1699') "PurpleDawn"
MessageStr('1700') "PurpleHaze"
MessageStr('1701') "Rainbow"
MessageStr('1702') "Ripples"
MessageStr('1703') "SharkFin"
MessageStr('1704') "SilverCurls"
MessageStr('1705') "TinFoil"
MessageStr('1706') "Molten Gold"
MessageStr('1707') "Aurora"
MessageStr('1708') "Blue Streaks"
MessageStr('1709') "Blue Waves"
MessageStr('1710') "Cloudscape"
MessageStr('1711') "Coal"
MessageStr('1712') "Cork"
MessageStr('1713') "Etheral Streaks"
MessageStr('1714') "Feathers"
MessageStr('1715') "Golden Rules"
MessageStr('1716') "Gray Waves"
MessageStr('1717') "Green Cones"
MessageStr('1718') "Grooves"
MessageStr('1719') "Harvest"
MessageStr('1720') "Marbled 2"
MessageStr('1721') "Marbled 3"
MessageStr('1722') "Marbled"
MessageStr('1723') "Painted"
MessageStr('1724') "Parchment"
MessageStr('1725') "Purple Grooves"
MessageStr('1726') "Rain"
MessageStr('1727') "Rainbow Dream"
MessageStr('1728') "Rake"
MessageStr('1729') "Ripples"
MessageStr('1730') "Ripples2"
MessageStr('1731') "Ripples3"
MessageStr('1732') "Sharkskin"
MessageStr('1733') "Silver Fibers"
MessageStr('1734') "Spiral"
MessageStr('1735') "Swirls"
MessageStr('1736') "Weave"
MessageStr('1737') "Woven"
MessageStr('1738') "Inside"
MessageStr('1739') "Outside"
MessageStr('1740') "Straight"
MessageStr('1741') "Wavey"
MessageStr('1742') "Deckled"
MessageStr('1743') "Zig Zag"
MessageStr('1744') "Blade"
MessageStr('1745') "Bumpy Slide"
MessageStr('1746') "Crest 1"
MessageStr('1747') "Crest 2"
MessageStr('1748') "Double Bump"
MessageStr('1749') "Downhill Hump"
MessageStr('1750') "Fin"
MessageStr('1751') "Gear Tracks"
MessageStr('1752') "Humps"
MessageStr('1753') "Jagged Peak 1"
MessageStr('1754') "Jagged Peak 2"
MessageStr('1755') "Jagged Peak 3"
MessageStr('1756') "Mountain Top"
MessageStr('1757') "Postage Stamp"
MessageStr('1758') "Rolling Waves"
MessageStr('1759') "Semi-Circle"
MessageStr('1760') "Swag"
MessageStr('1761') "Top Hat"
MessageStr('1762') "Edge Radius"
MessageStr('1763') "Polish"
MessageStr('1764') "Depth"
MessageStr('1765') "Surface Strength"
MessageStr('1766') "Imprint Size"
MessageStr('1767') "Orientation: Normal"
MessageStr('1768') "Environment"
MessageStr('1769') "Hue"
MessageStr('1770') "Saturation"
MessageStr('1771') "Luminance"
MessageStr('1772') "Softness"
MessageStr('1773') "Glassiness"
MessageStr('1774') "Fill With: None"
MessageStr('1775') "Fill Color"
MessageStr('1776') "Target:Feather Effect"
MessageStr('1777') "Filler Color"
MessageStr('1778') "Target:Photo"
MessageStr('1779') "Reflective"
MessageStr('1780') "Transform Map"
MessageStr('1781') "Opacity"
MessageStr('1782') "Refractive"
MessageStr('1783') "Surface Sheen"
MessageStr('1784') "Sheen Width"
MessageStr('1785') "Surface Color"
MessageStr('1786') "Surface Dirt"
MessageStr('1787') "Texture"
MessageStr('1788') "Scale"
MessageStr('1789') "Color Palette"
MessageStr('1790') "Dithering"
MessageStr('1791') "Global"
MessageStr('1792') "Tonal"
MessageStr('1793') "Color Press"
MessageStr('1794') "Quality"
MessageStr('1795') "No Delay"
MessageStr('1796') "DreamSuite"
MessageStr('1797') "Target:Outer"
MessageStr('1798') "Select Edge Effect"
MessageStr('1799') "Blending:Multipy"
MessageStr('1800') "Border Color"
MessageStr('1801') "Edge Softness"
MessageStr('1802') "Feather"
MessageStr('1803') "Roughen:None"
MessageStr('1804') "Size"
MessageStr('1805') "Strength"
MessageStr('1806') "Curl Shading"
MessageStr('1807') "Variation"
MessageStr('1808') "Light Tile:None"
MessageStr('1809') "Target:Edge Effect"
MessageStr('1810') "Size"
MessageStr('1812') "Strength"
MessageStr('1813') "Curl Shading"
MessageStr('1814') "Variation"
MessageStr('1815') "Light Tile:None"
MessageStr('1816') "None"
MessageStr('1817') "Load"
MessageStr('1818') "Edge Effect"
MessageStr('1819') "Background"
MessageStr('1820') "Opacity"
MessageStr('1821') "Red Frequency"
MessageStr('1822') "Red Change"
MessageStr('1823') "Green Frequency"
MessageStr('1824') "Green Change"
MessageStr('1825') "Blue Frequency"
MessageStr('1826') "Blue Change"
MessageStr('1827') "Wispy Smoke"
MessageStr('1828') "Random Seed"
MessageStr('1829') "Gaussian Blur"
MessageStr('1830') "Sharpen"
MessageStr('1831') "Zoom Blur"
MessageStr('1832') "Depth"
MessageStr('1833') "Color Tint"
MessageStr('1834') "Bevel: Angled"
MessageStr('1835') "Tint Color"
MessageStr('1836') "Paint Cracks"
MessageStr('1837') "Irregularity"
MessageStr('1838') "Separation"
MessageStr('1839') "Crack Opacity"
MessageStr('1840') "Crack Depth"
MessageStr('1841') "Curl Depth"
MessageStr('1842') "Branching"
MessageStr('1843') "Canvas Sensitivity"
MessageStr('1844') "Crack Alignment"
MessageStr('1845') "Variation"
MessageStr('1846') "Spacing"
MessageStr('1847') "Fold Depth"
MessageStr('1848') "Fold Width"
MessageStr('1849') "Frequency"
MessageStr('1850') "End Taper"
MessageStr('1851') "Crumple"
MessageStr('1852') "Crease Bumps"
MessageStr('1853') "Distortion"
MessageStr('1854') "Perspective"
MessageStr('1855') "Shrink Frame"
MessageStr('1856') "Variation"
MessageStr('1857') "Orientation: Downward"
MessageStr('1858') "Shapes: Squares"
MessageStr('1859') "Size"
MessageStr('1860') "Saturation"
MessageStr('1861') "Radius"
MessageStr('1862') "Back Color"
MessageStr('1863') "Under Color"
MessageStr('1864') "Roughness"
MessageStr('1865') "Depth"
MessageStr('1866') "Lip"
MessageStr('1867') "Deckle Width"
MessageStr('1868') "Fibers"
MessageStr('1869') "Random Seed"
MessageStr('1870') "Deckle Path:Inside"
MessageStr('1871') "Path Variation"
MessageStr('1872') "Deckle Irregularity"
MessageStr('1873') "Removal Distance"
MessageStr('1874') "Fiber Density"
MessageStr('1875') "Fiber Length"
MessageStr('1876') "Fiber Roughness"
MessageStr('1877') "Image Blending"
MessageStr('1878') "Curl Shading"
MessageStr('1879') "Surface Texture"
MessageStr('1880') "Surface Dirt"
MessageStr('1881') "Bevel:Blade"
MessageStr('1882') "Pre-Smooth"
MessageStr('1883') "Variation"
MessageStr('1884') "Color"
MessageStr('1885') "Blur"
MessageStr('1886') "Blend"
MessageStr('1887') "Tint Color"
MessageStr('1888') "HotSpot Intensity"
MessageStr('1889') "Zoom"
MessageStr('1890') "Ghosting"
MessageStr('1891') "Soften Mask"
MessageStr('1892') "Gaussian Blur"
MessageStr('1893') "Sharpen"
MessageStr('1894') "Zoom Blur"
MessageStr('1895') "Color Slider 1"
MessageStr('1896') "Slider 1"
MessageStr('1897') "Slider 2"
MessageStr('1898') "Target:Outer"
MessageStr('1899') "Outer"
MessageStr('1900') "Inner"
MessageStr('1901') "Select Edge Effect"
MessageStr('1902') "Blending:Multipy"
MessageStr('1903') "Multipy"
MessageStr('1904') "Add"
MessageStr('1905') "Overlay"
MessageStr('1906') "Border Color"
MessageStr('1907') "Edge Softness"
MessageStr('1908') "Feather"
MessageStr('1909') "Opacity"
MessageStr('1910') "Inner Opacity"
MessageStr('1911') "Roughen: None"
MessageStr('1912') "Inner"
MessageStr('1913') "None"
MessageStr('1914') "Softness"
MessageStr('1915') "Orientation: Normal"
MessageStr('1916') "Normal"
MessageStr('1917') "Rotate 90"
MessageStr('1918') "Rotate 180"
MessageStr('1919') "Rotate 270"
MessageStr('1920') "Flip Horz."
MessageStr('1921') "Flip Vert."
MessageStr('1922') "Depth"
MessageStr('1923') "Lip"
MessageStr('1924') "Color Tint"
MessageStr('1925') "Random Seed"
MessageStr('1926') "Frame Color"
MessageStr('1927') "Track Color"
MessageStr('1928') "End 1 Curl"
MessageStr('1929') "End 2 Curl"
MessageStr('1930') "Wrinkle"
MessageStr('1931') "Variation"
MessageStr('1932') "Radial"
MessageStr('1933') "Radius"
MessageStr('1934') "Frequency"
MessageStr('1935') "Randomize"
MessageStr('1936') "Rotate"
MessageStr('1937') "Twirl"
MessageStr('1938') "Ripple"
MessageStr('1939') "Branching"
MessageStr('1940') "Jagged"
MessageStr('1941') "Soft Blur"
MessageStr('1942') "Radius"
MessageStr('1943') "Soften Mask"
MessageStr('1944') "Edge Radius"
MessageStr('1945') "Polish"
MessageStr('1946') "Gel Color"
MessageStr('1947') "Pre-Smooth"
MessageStr('1948') "Surface Sheen"
MessageStr('1949') "Sheen Width"
MessageStr('1950') "Color"
MessageStr('1951') "Size"
MessageStr('1952') "Height"
MessageStr('1953') "Cut"
MessageStr('1954') "Grooves"
MessageStr('1955') "Cracks"
MessageStr('1956') "Grain"
MessageStr('1957') "Glow 1"
MessageStr('1958') "Glow 2"
MessageStr('1959') "Blend 1"
MessageStr('1960') "Blend 2"
MessageStr('1961') "Vibrancy"
MessageStr('1962') "Roughness"
MessageStr('1963') "Glow Color"
MessageStr('1964') "Glow Amount"
MessageStr('1965') "Glow Softness"
MessageStr('1966') "Height"
MessageStr('1967') "Wispy"
MessageStr('1968') "Density"
MessageStr('1969') "Wind"
MessageStr('1970') "Frame Color"
MessageStr('1971') "Frame Age"
MessageStr('1972') "Image Age"
MessageStr('1973') "Curl Shading"
MessageStr('1974') "Edge Height"
MessageStr('1975') "Edge Fray"
MessageStr('1976') "Shrink Frame"
MessageStr('1977') "Fork Lightning"
MessageStr('1978') "Thickness"
MessageStr('1979') "Jaggedness"
MessageStr('1980') "Branching"
MessageStr('1981') "Random Seed"
MessageStr('1982') "Edge Radius"
MessageStr('1983') "Polish"
MessageStr('1984') "Depth"
MessageStr('1985') "Surface Color"
MessageStr('1986') "Gloss"
MessageStr('1987') "Specularity"
MessageStr('1988') "Silk"
MessageStr('1989') "Reflection"
MessageStr('1990') "Refraction"
MessageStr('1991') "Horizontal Strips"
MessageStr('1992') "Vertical Strips"
MessageStr('1993') "Horizontal Spacing"
MessageStr('1994') "Vertical Spacing"
MessageStr('1995') "Image Offset"
MessageStr('1996') "Strip Offset"
MessageStr('1997') "Hue Shift"
MessageStr('1998') "Background W/ Offset"
MessageStr('1999') "End 1 Height"
MessageStr('2000') "End 2 Height"
MessageStr('2001') "Strip Curl"
MessageStr('2002') "Edge Curl"
MessageStr('2003') "Edge Height"
MessageStr('2004') "Deckle Width"
MessageStr('2005') "Deckle Irregularity"
MessageStr('2006') "Hue"
MessageStr('2007') "Saturation"
MessageStr('2008') "Luminance"
MessageStr('2009') "Softness"
MessageStr('2010') "Sepia Tone"
MessageStr('2011') "Variation"
MessageStr('2012') "Fill Volume"
MessageStr('2013') "Metal: Metal 1"
MessageStr('2014') "Edge Radius"
MessageStr('2015') "Polish"
MessageStr('2016') "Depth"
MessageStr('2017') "Pre-Smooth"
MessageStr('2018') "Tile Type: Square"
MessageStr('2019') "Tile Size"
MessageStr('2020') "Neatness"
MessageStr('2021') "Random Seed"
MessageStr('2022') "Spacing"
MessageStr('2023') "Separation"
MessageStr('2024') "Irregularity"
MessageStr('2025') "Curl"
MessageStr('2026') "Flake"
MessageStr('2027') "Light Color"
MessageStr('2028') "Ambient Light"
MessageStr('2029') "Glare Strength"
MessageStr('2030') "Shadow Color"
MessageStr('2031') "Shadow Height"
MessageStr('2032') "Shadow Softness"
MessageStr('2033') "Light Color"
MessageStr('2034') "Ambient Light"
MessageStr('2035') "Glare Strength"
MessageStr('2036') "Shadow Color"
MessageStr('2037') "Back Color"
MessageStr('2038') "Under Color"
MessageStr('2039') "Roughness"
MessageStr('2040') "Radius"
MessageStr('2041') "Target: Outer"
MessageStr('2042') "Blending: Multipy"
MessageStr('2043') "Edge Softness"
MessageStr('2044') "Feather"
MessageStr('2045') "Opacity"
MessageStr('2046') "Roughen: None"
MessageStr('2047') "Size"
MessageStr('2048') "Strength"
MessageStr('2049') "Border Color"
MessageStr('2050') "Curl Shading"
MessageStr('2051') "Target: Edge Effect"
MessageStr('2052') "Light Tile: None"
MessageStr('2053') "Softness"
MessageStr('2054') "Orientation: Normal"
MessageStr('2055') "Shape Type"
MessageStr('2056') "Streak Size"
MessageStr('2057') "Distance"
MessageStr('2058') "Feather Radius"
MessageStr('2059') "Feather Opacity"
MessageStr('2060') "Edge Effect"
MessageStr('2061') "Background"
MessageStr('2062') "Opacity"
MessageStr('2063') "Focal Radius"
MessageStr('2064') "Focal Opacity"
MessageStr('2065') "Variation"
MessageStr('2066') "Arrange: Single"
MessageStr('2067') "Cut Size"
MessageStr('2068') "Border Size"
MessageStr('2069') "Curl Shading"
MessageStr('2070') "Edge Height"
MessageStr('2071') "Shrink Frame"
MessageStr('2072') "Border Age"
MessageStr('2073') "Image Age"
MessageStr('2074') "Texture"
MessageStr('2075') "Dirt"
MessageStr('2076') "Gloss"
MessageStr('2077') "Style: Masking"
MessageStr('2078') "Tape Color"
MessageStr('2079') "Dirt"
MessageStr('2080') "Age"
MessageStr('2081') "Tear"
MessageStr('2082') "Serration"
MessageStr('2083') "Wrinkles"
MessageStr('2084') "Texture"
MessageStr('2085') "Gloss"
MessageStr('2086') "Curl"
MessageStr('2087') "Random Seed"
MessageStr('2088') "Border Height"
MessageStr('2089') "Edge Tool Depth"
MessageStr('2090') "Edge Tool Scale"
MessageStr('2091') "Edge Tool Opacity"
MessageStr('2092') "Bulge Depth"
MessageStr('2093') "Grain"
MessageStr('2094') "Wavelength"
MessageStr('2095') "Stipple"
MessageStr('2096') "Tissue"
MessageStr('2097') "Influence"
MessageStr('2098') "Depth"
MessageStr('2099') "Radius"
MessageStr('2100') "Crumple"
MessageStr('2101') "Crumple Size"
MessageStr('2102') "Background Color"
MessageStr('2103') "Style: Flaps"
MessageStr('2104') "Underside Color"
MessageStr('2105') "Strips"
MessageStr('2106') "Vertical Strips"
MessageStr('2107') "Strip Spacing"
MessageStr('2108') "Image Offset"
MessageStr('2109') "Strip Shift"
MessageStr('2110') "Size Change"
MessageStr('2111') "Hue Shift"
MessageStr('2112') "Background W/ Offset"
MessageStr('2113') "End 1 Height"
MessageStr('2114') "End 2 Height"
MessageStr('2115') "Strip Curl"
MessageStr('2116') "Edge Curl"
MessageStr('2117') "Edge Height"
MessageStr('2118') "Deckle Width"
MessageStr('2119') "Deckle Irregularity"
MessageStr('2120') "Hue"
MessageStr('2121') "Saturation"
MessageStr('2122') "Luminance"
MessageStr('2123') "Softness"
MessageStr('2124') "Sepia Tone"
MessageStr('2125') "Variation"
MessageStr('2126') "Color Mix"
MessageStr('2127') "Halo Softness"
MessageStr('2128') "Halo Intensity"
MessageStr('2129') "Mottle Background"
MessageStr('2130') "Halo Color"
MessageStr('2131') "Image Blend"
MessageStr('2132') "Image Blur"
MessageStr('2133') "Glow Inward"
MessageStr('2134') "Soften Mask"
MessageStr('2135') "Ghost Highlight"
MessageStr('2136') "Ghost Amount"
MessageStr('2137') "Image Contrast"
MessageStr('2138') "Tinting"
MessageStr('2139') "Width"
MessageStr('2140') "Frequency"
MessageStr('2141') "Bulge"
MessageStr('2142') "Gloss"
MessageStr('2143') "Strength"
MessageStr('2144') "Influence"
MessageStr('2145') "Smudge"
MessageStr('2146') "Influence"
MessageStr('2147') "Frame Color"
MessageStr('2148') "Track Color"
MessageStr('2149') "Height"
MessageStr('2150') "Wrinkle"
MessageStr('2151') "Ripples:Circular"
MessageStr('2152') "Wavelength"
MessageStr('2153') "Compression"
MessageStr('2154') "Waves:Smooth"
MessageStr('2155') "Phase"
MessageStr('2156') "Movement"
MessageStr('2157') "Disorderly"
MessageStr('2158') "Fade Out"
MessageStr('2159') "Highlight Color"
MessageStr('2160') "Shadow Color"
MessageStr('2161') "Shadow Softness"
MessageStr('2162') "Shadow Height"
MessageStr('2163') "Style: Blurred"
MessageStr('2164') "BlurMain"
MessageStr('2165') "BlurShaked"
MessageStr('2166') "Blend"
MessageStr('2167') "ShakeAmount"
MessageStr('2168') "Shake Steps"
MessageStr('2169') "Rotate"
MessageStr('2170') "Ghosting"
MessageStr('2171') "Ghost Color 1"
MessageStr('2172') "Seed"
MessageStr('2173') "Wispy Smoke"
MessageStr('2174') "Smoke Color"
MessageStr('2175') "Height"
MessageStr('2176') "Billow"
MessageStr('2177') "Density"
MessageStr('2178') "Wind"
MessageStr('2179') "Random Seed"
MessageStr('2180') "Glow Type: Flare"
MessageStr('2181') "Radius"
MessageStr('2182') "Noise"
MessageStr('2183') "Wisps"
MessageStr('2184') "Opacity"
MessageStr('2185') "Frame Color"
MessageStr('2186') "Frame Age"
MessageStr('2187') "Image Age"
MessageStr('2188') "Curl Shading"
MessageStr('2189') "Edge Height"
MessageStr('2190') "Corner Rounding"
MessageStr('2191') "Variation"
MessageStr('2192') "Shape: Square"
MessageStr('2193') "Edge Angle"
MessageStr('2194') "Curl"
MessageStr('2195') "Deckle Width"
MessageStr('2196') "Deckle Irregularity"
MessageStr('2197') "Saturation"
MessageStr('2198') "Luminance"
MessageStr('2199') "Softness"
MessageStr('2200') "Sepia Tone"
MessageStr('2201') "Variation"
MessageStr('2202') "Bevel: None"
MessageStr('2203') "Differences"
MessageStr('2204') "Size"
MessageStr('2205') "Hue"
MessageStr('2206') "Standard"
MessageStr('2207') "Paint Color"
MessageStr('2208') "Second Color"
MessageStr('2209') "Third Color"
MessageStr('2210') "Overspray"
MessageStr('2211') "Roughness"
MessageStr('2212') "Surrounding Glow"
MessageStr('2213') "Highlight"
MessageStr('2214') "Threshold"
MessageStr('2215') "Length"
MessageStr('2216') "Width"
MessageStr('2217') "Opacity"
MessageStr('2518') "Tape: Masking"
MessageStr('2219') "Tape Color"
MessageStr('2220') "Tape Color"
MessageStr('2221') "Age"
MessageStr('2922') "Curl"
MessageStr('2223') "Distortion"
MessageStr('2224') "Perspective"
MessageStr('2225') "Crumple Tears"
MessageStr('2226') "Serration Size"
MessageStr('2227') "Wrinkles"
MessageStr('2228') "Wrinkle Size"
MessageStr('2229') "Fray"
MessageStr('2230') "Overlap Opacity"
MessageStr('2231') "Overlap Softness"
MessageStr('2232') "Dirt"
MessageStr('2233') "Gloss"
MessageStr('2234') "Back Color"
MessageStr('2235') "Under Color"
MessageStr('2236') "Differences"
MessageStr('2237') "Size"
MessageStr('2238') "Shape: Square"
MessageStr('2239') "Wavelength"
MessageStr('2240') "Border"
MessageStr('2241') "Stipple"
MessageStr('2242') "Tissue"
MessageStr('2243') "Influence"
MessageStr('2244') "Depth"
MessageStr('2245') "Wavelength"
MessageStr('2246') "Random Seed"
MessageStr('2247') "Feather"
MessageStr('2248') "Strength"
MessageStr('2249') "Border Color"
MessageStr('2250') "Curl Shading"
MessageStr('2251') "Edge Softness"
MessageStr('2252') "Streak Size"
MessageStr('2253') "Distance"
MessageStr('2254') "Edge Height"
MessageStr('2255') "Corner Rounding"
MessageStr('2256') "Bevel: Lip"
MessageStr('2257') "Shrink Frame"
MessageStr('2258') "Frame Color"
MessageStr('2259') "Frame Age"
MessageStr('2260') "Image Age"
MessageStr('2261') "Vertical Wisp"
MessageStr('2262') "Horizontal Wisp"
MessageStr('2263') "Density"
MessageStr('2264') "Bevel: None"
MessageStr('2265') "Target: Edge Effect"
MessageStr('2266') "Roughen: None"
MessageStr('2267') "Orientation: Normal "
MessageStr('2268') "Blending: Multipy"
MessageStr('2269') " "
MessageStr('2270') "Lighting"
MessageStr('2271') " "
MessageStr('2272') "10"
MessageStr('2273') "6"
MessageStr('2274') "Ellipse"
MessageStr('2275') "Square"
MessageStr('2276') "Triangle"
MessageStr('2277') "Starburst"
MessageStr('2278') "Starburst 2"
MessageStr('2279') "Starburst 3"
MessageStr('2280') "Starburst 4"
MessageStr('2281') "Starburst 5"
MessageStr('2282') "Starburst 6"
MessageStr('2283') "Starburst 7"
MessageStr('2284') "Starburst 8"
MessageStr('2285') "Starburst 9"
MessageStr('2286') "Starburst 10"
MessageStr('2287') "Starburst 11"
MessageStr('2288') "Starburst 12"
MessageStr('2289') "Star1"
MessageStr('2290') "Star2"
MessageStr('2291') "Star3"
MessageStr('2292') "Star4"
MessageStr('2293') "Star5"
MessageStr('2294') "Star6"
MessageStr('2295') "Star7"
MessageStr('2296') "Star8"
MessageStr('2297') "Star9"
MessageStr('2298') "Star10"
MessageStr('2299') "Textbox1"
MessageStr('2300') "Textbox2"
MessageStr('2301') "Textbox3"
MessageStr('2302') "Textbox4"
MessageStr('2303') "CircleCircle"
MessageStr('2304') "CircleMinis"
MessageStr('2305') "CircleMinus"
MessageStr('2306') "CirclePie"
MessageStr('2307') "CirclePlus"
MessageStr('2308') "CircleSquare"
MessageStr('2309') "CircleStar"
MessageStr('2310') "CircleTriangle"
MessageStr('2311') "CircleX"
MessageStr('2312') "Cross1"
MessageStr('2313') "Asterisk"
MessageStr('2314') "Cross2"
MessageStr('2315') "Cross3"
MessageStr('2316') "Decagon"
MessageStr('2317') "Diamond"
MessageStr('2318') "Dodecagon"
MessageStr('2319') "Enneagon"
MessageStr('2320') "Heptagon"
MessageStr('2321') "Hexagon"
MessageStr('2322') "Octagon"
MessageStr('2323') "Pentagon"
MessageStr('2324') "Heart"
MessageStr('2325') "LawBadge"
MessageStr('2326') "PiePieces"
MessageStr('2327') "Plus1"
MessageStr('2328') "Plus2"
MessageStr('2329') "Streaks: None"
MessageStr('2330') "None"
MessageStr('2331') "Blades"
MessageStr('2332') "Dots"
MessageStr('2333') "Etched"
MessageStr('2334') "Gate"
MessageStr('2335') "Glass Cutter"
MessageStr('2336') "Grid"
MessageStr('2337') "Hairy"
MessageStr('2338') "Lines"
MessageStr('2339') "Marbled"
MessageStr('2340') "Patch"
MessageStr('8341') "Roughen"
MessageStr('2442') "Spots"
MessageStr('2343') "Streak Size"
MessageStr('2345') "Target: Outer"
MessageStr('2344') "Light Tile: None"
MessageStr('2346') "Deckle Selection: Outside"
MessageStr('2347') "Pge Convert"
MessageStr('2348') "Frame Convert"
MessageStr('2387') "Target: Frame Effect"
MessageStr('2388') "Image"
MessageStr('2349') "Color Picker"
MessageStr('2350') "Old Color"
MessageStr('2351') "New Color"
MessageStr('2352') "H"
MessageStr('2353') "S"
MessageStr('2354') "L"
MessageStr('2355') "R"
MessageStr('2356') "G"
MessageStr('2357') "B"
MessageStr('2900') "Catalog"
MessageStr('2902') "Catalog"
MessageStr('2901') "Open Dialog"
MessageStr('2903') "Select Edge:"
MessageStr('9000') "Select: Outside Edge"
MessageStr('9001') "Select: Inside Edge"
MessageStr('9002') "Edge"
MessageStr('9003') "Edge: None"
MessageStr('9004') "Link Shadow Color"
MessageStr('9005') "Transparent Image"
MessageStr('9006') "Shadow Intensity"
MessageStr('9007') "Gel 1"
MessageStr('9008') "Gel 2"
MessageStr('9009') "Gel: Gel 1"
MessageStr('9010') "New Gel..."
MessageStr('9011') "Global"
MessageStr('9012') "Image Color"
MessageStr('9013') "Surface Color"
MessageStr('9101') "History"
MessageStr('9102') "Volumes"
MessageStr('9110') "Select Preset..."
MessageStr('9111') "2 Pictures Stripe1"
MessageStr('9112') "2 Pictures Stripe2"
MessageStr('9113') "2 Pictures Stripe3"
MessageStr('9114') "2 Pictures Stripe4"
MessageStr('9115') "Weave"
MessageStr('9116') "Shape Coverage"
MessageStr('9117') "Tile Offsets"
MessageStr('9118') "Size Change"
MessageStr('9119') "SpotLight"
MessageStr('9120') "Feather"
MessageStr('9121') "SpotLight Size"
MessageStr('9122') "Document Shadows (Fade Lights Only)"
MessageStr('9123') "Re-Press"
MessageStr('9124') "Length Change"
MessageStr('9125') "Image Rotation"
MessageStr('9126') "Width Change"
MessageStr('9127') "Strip Height"
MessageStr('9200') "Original Photo"
MessageStr('9201') "Presets"
MessageStr('9202') "Tile Pieces"
MessageStr('A100') "Automatically Enhance"
MessageStr('A101') "Enhance Strength: 2x"
MessageStr('A102') "None"
MessageStr('A103') "1x"
MessageStr('A104') "2x"
MessageStr('A105') "3x"
MessageStr('A106') "4x"
MessageStr('A107') "Remove Color Cast"
MessageStr('A108') "Rebuild Detail"
MessageStr('A109') "Smooth Noise"
MessageStr('A111') "Red"
MessageStr('A112') "Green"
MessageStr('A113') "Blue"
MessageStr('A114') "Saturation"
MessageStr('A115') "Hue "
MessageStr('A116') "Tonal Range"
MessageStr('A117') "Contrast"
MessageStr('A118') "Brightness"
MessageStr('A119') "Anti-MoirÈ"
MessageStr('A120') "Tonal: None"
MessageStr('A121') "None"
MessageStr('A122') "Normal"
MessageStr('A123') "Harden Details"
MessageStr('A124') "Soften Details"
MessageStr('A125') "Vibrancy"
MessageStr('A126') "Channel: Composite RGB"
MessageStr('A127') "Composite RGB"
MessageStr('A128') "Red Channel"
MessageStr('A129') "Green Channel"
MessageStr('A130') "Blue Channel"
MessageStr('A131') "Opacity"
MessageStr('A132') "Blur Type: None"
MessageStr('A133') "Motion"
MessageStr('A134') "Radial"
MessageStr('A135') "Zoom"
MessageStr('A136') "Normal"
MessageStr('A137') "Blur Strength"
MessageStr('A138') "Intensity"
MessageStr('A139') "Picture 2: None"
MessageStr('A140') "Weave"

String('NMST') "New Metal"
LayerName('ISBL') "Channels"
NameID('DEFn') "DeFault Help"
DescID('DEFd') "DeFault Help"
HelpID('DEFh') "FluidityHelp.html#DeFault Help"
NameID('CLBn') "Color Picker"
DescID('CLBd') "Select this tool to show the Color Picker."
HelpID('CLBh') "FluidityHelp.html#Tools_ColorPicker"
NameID('MAGn') "Magnify Tool"
DescID('MAGd') "Select the tool and then click on the document to zoom in to that portion of the image. Draw a rectangle with the tool to control the level of zoom."
HelpID('MAGh') "FluidityHelp.html#Tools_Magnify"
NameID('PANn') "Pan Tool"
DescID('PANd') "Select the tool and then click on the document and drag to position it."
HelpID('PANh') "FluidityHelp.html#Tools_Pan"
NameID('MOVn') "Move Tool"
DescID('MOVd') "Select the tool and then click on the document and drag to position the targeted selection."
HelpID('MOVh') "FluidityHelp.html#Tools_Move"
NameID('MARn') "Marquee Tool"
DescID('MARd') "Select the tool and then click on the document and drag to make a quick selection."
HelpID('MARh') "FluidityHelp.html#Tools_Marquee"
NameID('SELn') "Selection Tool"
DescID('SELd') "Select the tool and then click on the document to make a selection."
HelpID('SELh') "FluidityHelp.html#Tools_Selection"
NameID('LASn') "Lasso Tool"
DescID('LASd') "Select the tool and then drag to position the document."
HelpID('LASh') "FluidityHelp.html#Tools_Lasso"
NameID('TRAn') "Transform Tool"
DescID('TRAd') "Select the tool and then drag to position the document."
HelpID('TRAh') "FluidityHelp.html#Tools_Transform"
NameID('PERn') "Perspective Tool"
DescID('PERd') "Select the tool and then drag to position the document."
HelpID('PERh') "FluidityHelp.html#Tools_Perspective"
NameID('AIRn') "Brush Tool"
DescID('AIRd') "Select the tool and then drag to position the document."
HelpID('AIRh') "FluidityHelp.html#Tools_Brush"
NameID('ERAn') "Eraser Tool"
DescID('ERAd') "Select the tool and then drag to position the document."
HelpID('ERAh') "FluidityHelp.html#Tools_Eraser"
NameID('CLOn') "Clone Tool"
DescID('CLOd') "Select the tool and then drag to position the document."
HelpID('CLOh') "FluidityHelp.html#Tools_Clone"
NameID('PUTn') "Putty Tool"
DescID('PUTd') "Select the tool and then drag to position the document."
HelpID('PUTh') "FluidityHelp.html#Tools_Putty"
NameID('MELn') "Meld Tool"
DescID('MELd') "Select the tool and then drag to position the document."
HelpID('MELh') "FluidityHelp.html#Tools_Meld"
NameID('CRLn') "Crop Canvas Tool"
DescID('CRLd') "Select the tool and then drag to position the document."
HelpID('CRLh') "FluidityHelp.html#Tools_CropCanvas"
NameID('CROn') "Crop Photo Tool"
DescID('CROd') "Select the tool and then drag to position the document."
HelpID('CROh') "FluidityHelp.html#Tools_CropPhoto"
NameID('TEXn') "Type Tool"
DescID('TEXd') "Select the tool and then drag to position the document."
HelpID('TEXh') "FluidityHelp.html#Tools_Type"
NameID('STRn') "Stroke Tool"
DescID('STRd') "Select the tool and then drag to position the document."
HelpID('STRh') "FluidityHelp.html#Tools_Stroke"
NameID('FILn') "Fill Tool"
DescID('FILd') "Select the tool and then drag to position the document."
HelpID('FILh') "FluidityHelp.html#Tools_Fill"
NameID('MASn') "Masking"
DescID('MASd') "Select the tool and then drag to position the document."
HelpID('MASh') "FluidityHelp.html#Tools_Mask"
NameID('EFFn') "Special Effects"
DescID('EFFd') "Select the tool and then drag to position the document."
HelpID('EFFh') "FluidityHelp.html#Tools_Effects"
NameID('FTRn') "Filters"
DescID('FTRd') "Select the tool and then drag to position the document."
HelpID('FTRh') "FluidityHelp.html#Tools_Filters"
NameID('MEDn') "Natural Media"
DescID('MEDd') "Select the tool and then drag to position the document."
HelpID('MEDh') "FluidityHelp.html#Tools_NaturalMedia"
NameID('ENHn') "Enhance"
DescID('ENHd') "Select the tool and then drag to position the document."
HelpID('ENHh') "FluidityHelp.html#Tools_Enhance"
NameID('1L07') "Tape Type"
DescID('1L08') "Use the Tape Type menu to select the type of tape you want. The currently selected tape will be changed into the tape type that you select from this menu. Tape tears and frays you have added to the effect will remain on the effect even if you change the type of tape under this menu. Tape types include Masking Tape, Transparent Tape, Sports Tape and Duct Tape."
HelpID('1') ""
NameID('tap1') "Tape Color"
DescID('tap2') "Use the Tape Color slider to adjust the color and opacity of the tape. Click on the color box change the color of the tape. Reduce the slider values to make the tape semi-transparent."
HelpID('2') ""
NameID('U001') "File Menu"
DescID('U002') "Load Mask allows you to load up a mask that is applied to your image, Save lets you save out copies of your work, Exit quits the application or plug-in."
HelpID('3') ""
NameID('U003') "Edit Menu"
DescID('U004') "The Edit menu provides access to the application preferences, bring objects to the front or send them to the back of a layer stack, inverse selections and clear selections."
HelpID('4') ""
NameID('U007') "Revert"
DescID('U008') "Pressing the Revert button changes the document back to how it looked when you first selected the effect. If you selected a preset from the effects menu Revert will reapply the preset."
HelpID('5') ""
NameID('U009') "Render"
DescID('U010') "When you see the Render button onscreen you must press the button after making your control changes and the preview will then update."
HelpID('6') ""
NameID('U017') "Zoom Tool"
DescID('U018') "The zoom tool enables you to see your effect work close up. Toggle the Alt/Option key to change from Zoom In to Zoom Out. The zoom tool supports two types of zooming. The first type of zooming is the basic type. Click over the area of the image and the preview gets bigger. This works with zooming out as well. The second type of zooming involves dragging the zoom cursor over the preview to create a marquee area. Whatever is inside this marquee when the mouse button is released will be shown in the preview window. This type of zooming is the most efficient as it places exactly the area of interest in the preview window. Drag around the area of interest with the Zoom Tool."
HelpID('7') ""
NameID('U019') "Memory Dots"
DescID('U020') "The Memory Dots control allows you to take a snapshot of your work while you are exploring different visual options. When you click on a Memory Dot DreamSuite remembers the exact way the effect looks, where all elements are positioned and will return you to this point if you click back on the dot again. Memory Dots are easy to use. Click on a dot to take a snapshot and the dot turns from silver to a color. Click on a colored dot and the Memory Dot loads back in the exact look from memory and then turns silver again so you can record over it again."
HelpID('8') ""
NameID('U21 ') "Pan Tool"
DescID('U22 ') "This tool enables you to adjust the visible areas of the preview when you are zoomed in. With this tool active you hold down on the mouse button and drag to pull the preview around."
HelpID('9') ""
NameID('U23 ') "Cancel"
DescID('U24 ') "Pressing Cancel exits the application."
HelpID('10') ""
NameID('U25 ') "OK"
DescID('U26 ') "Pressing OK takes the current settings and applies them to your image in the image editing or host application you are using."
HelpID('11') ""
NameID('U013') "Save Preset"
DescID('U014') "The Save Preset button will capture the effect look you have created and save all the settings used to generate that look again. These settings are called a Preset. The preset will be saved and filed under the Special Effects menu under the effect name you are working in. After you press the Save Preset button you will be prompted to name the preset. The preset name length is limited to 15 characters so users of older operating systems may safely save and load presets. To remove a preset you have saved use the Remove Preset menu. Inside the DreamSuite folder is an Effect Preset folder. Each effect has its own preset folder where it stores the presets. You can share these preset files with others or you can add in more into the proper effects folder."
HelpID('12') ""
NameID('U27 ') "General Controls Tab"
DescID('U28 ') ""
HelpID('13') ""
NameID('U29 ') "Render Button Checkbox"
DescID('U30 ') "When this option is checked on DreamSuite will create a Render button on the main control interface and the software will operate in Render mode. When you are in Render mode the preview will not update until you press Render. This feature allows you to modify an unlimited number of controls, move onscreen paths and ellipses and make other changes to the document without having the software start to process the effect when you pause."
HelpID('14') ""
NameID('U31 ') "Delayed Render Checkbox"
DescID('U32 ') "When this option is checked on DreamSuite will wait for a specified amount of time after you have moved the last control before updating the preview. This delay allows you to move multiple controls. Adjust the delay time using the Delay Time menu."
HelpID('15') ""
NameID('U35 ') "Proxy Preview Checkbox"
DescID('U36 ') "When this option is checked on DreamSuite will cache a smaller copy of your image and use this for the preview. When you apply or save your file DreamSuite will render the effect settings to the larger image based on an averaged scale. Proxy gives you the advantage of speed when working with larger files. Regardless of how large your file is, Proxy mode always works on a preview sized image. Disadvantages of Proxy is that in some cases the preview and the final applied version will vary slightly. If you encounter results on the save or apply that differ from your preview we recommend turning Proxy off and trying your work again."
HelpID('16') ""
NameID('U37 ') "Flavors Controls Tab"
DescID('U38 ') ""
HelpID('17') ""
NameID('U39 ') "Blue Berries"
DescID('b') ""
HelpID('18') ""
NameID('U40 ') "Sparkling Water"
DescID('') ""
HelpID('19') ""
NameID('U41 ') "Bubble Gum"
DescID('') ""
HelpID('20') ""
NameID('U42 ') "Groovy Grape"
DescID('') ""
HelpID('21') ""
NameID('U43 ') "Orange Cola"
DescID('') ""
HelpID('22') ""
NameID('U44 ') "Green Apple"
DescID('') ""
HelpID('23') ""
NameID('U45 ') "Gray Grits"
DescID('') ""
HelpID('24') ""
NameID('U46 ') "Peach Cobbler"
DescID('') ""
HelpID('25') ""
NameID('U47 ') "Very Strawberry"
DescID('') ""
HelpID('') ""
NameID('U48 ') "Wild Berries"
DescID('') ""
HelpID('26') ""
NameID('U49 ') "Banana Split"
DescID('') ""
HelpID('27') ""
NameID('U50 ') "Keylime Pie"
DescID('') ""
HelpID('') ""
NameID('U51 ') "Lime"
DescID('') ""
HelpID('') ""
NameID('U52 ') "Cola"
DescID('') ""
HelpID('') ""
NameID('U53 ') "Desktop Textures Controls Tab"
DescID('U54 ') ""
HelpID('') ""
NameID('U55 ') "Clear Winter Night"
DescID('') ""
HelpID('') ""
NameID('U56 ') "Marble"
DescID('') ""
HelpID('') ""
NameID('U57 ') "Blue Streaks"
DescID('') ""
HelpID('') ""
NameID('U58 ') "Plaster"
DescID('') ""
HelpID('') ""
NameID('U59 ') "Dimples"
DescID('') ""
HelpID('') ""
NameID('U60 ') "Parchment"
DescID('') ""
HelpID('') ""
NameID('U61 ') "Speckles"
DescID('') ""
HelpID('') ""
NameID('U62 ') "Industrial"
DescID('') ""
HelpID('') ""
NameID('U63 ') "Elephant Skin"
DescID('') ""
HelpID('') ""
NameID('U64 ') "White Streaks"
DescID('') ""
HelpID('') ""
NameID('U65 ') "Goose Bumps"
DescID('') ""
HelpID('') ""
NameID('U66 ') "Black Burlap"
DescID('') ""
HelpID('') ""
NameID('U67 ') "Morning Fog"
DescID('') ""
HelpID('') ""
NameID('U68 ') "Scratch Board"
DescID('') ""
HelpID('') ""
NameID('U69 ') "Desktop Colors Controls Tab"
DescID('U70 ') ""
HelpID('') ""
NameID('U71 ') "Tan"
DescID('') ""
HelpID('') ""
NameID('U72 ') "Peach"
DescID('') ""
HelpID('') ""
NameID('U73 ') "White"
DescID('') ""
HelpID('') ""
NameID('U74 ') "Cool Gray"
DescID('') ""
HelpID('') ""
NameID('U75 ') "Warm Gray"
DescID('') ""
HelpID('') ""
NameID('U76 ') "Yellow"
DescID('') ""
HelpID('') ""
NameID('U77 ') "Green"
DescID('') ""
HelpID('') ""
NameID('U78 ') "Black"
DescID('') ""
HelpID('') ""
NameID('U79 ') "Beige"
DescID('') ""
HelpID('') ""
NameID('U80 ') "Medium Gray"
DescID('') ""
HelpID('') ""
NameID('U81 ') "Rose"
DescID('') ""
HelpID('') ""
NameID('U82 ') "Dark Gray"
DescID('') ""
HelpID('') ""
NameID('U83 ') "Light Tan"
DescID('') ""
HelpID('') ""
NameID('U84 ') "Purple"
DescID('') ""
HelpID('') ""
NameID('U85 ') "Effect Controls Tab"
DescID('') ""
HelpID('') ""
NameID('U86 ') "Surface Controls Tab"
DescID('') ""
HelpID('') ""
NameID('U87 ') "Environment Controls Tab"
DescID('') ""
HelpID('') ""
NameID('U88 ') "Lighting Controls Tab"
DescID('') ""
HelpID('') ""
NameID('U89 ') "Effect Controls Tab"
DescID('') ""
HelpID('') ""
NameID('U90 ') "Surface Controls Tab"
DescID('') ""
HelpID('') ""
NameID('U91 ') "Environment Controls Tab"
DescID('') ""
HelpID('') ""
NameID('U92 ') "Lighting Controls Tab"
DescID('') ""
HelpID('') ""
NameID('U93 ') "Effect Controls Tab"
DescID('') ""
HelpID('') ""
NameID('U94 ') "Surface Controls Tab"
DescID('') ""
HelpID('') ""
NameID('U95 ') "Lighting Controls Tab"
DescID('') ""
HelpID('') ""
NameID('SERN') "Edge Radius"
DescID('SERQ') "The Edge Radius slider adjusts the angle and sharpness of the bevel edge. Use this control with Polish and Bevel Depth sliders to refine the look of the depth effect."
HelpID('') ""
NameID('SPCN') "Polish"
DescID('SPCQ') "The Polish slider rounds and smoothes the angles of the bevel making them softer with gentle curves versus sharp angles. Use this control with the Edge Radius and Bevel Depth sliders to refine the look of the depth effect."
HelpID('') ""
NameID('SBDN') "Bevel Depth"
DescID('SBDQ') "The Depth slider changes the height of the bevel. Stronger settings make the bevel appear to have more height and depth. Use this control with the Edge Radius and Polish sliders to refine the look of the depth effect."
HelpID('') ""
NameID('SPSN') "Pre-Smooth Mask"
DescID('SPSQ') "The Pre-Smooth Mask slider smoothes the edges of the selection mask. The quality of the selection mask you are using can impact the results you achieve from the effect."
HelpID('') ""
NameID('CSTN') "Shield Transparency"
DescID('CSTQ') "When the Shield Transparency option is checked the effect will only apply to the pixels on the layer and will not affect the transparent areas. Checking this option will change how DreamSuite applies the effect around a selection or on artwork on a layer."
HelpID('') ""
NameID('CABN') "Apply Background Image"
DescID('CABQ') "When the Apply Background Image option is on, the background image behind the selection will show up in the preview and will also apply as part of the effect."
HelpID('') ""
NameID('UVAN') "Optional Variations"
DescID('UVAQ') "The Optional Variations control will change combinations of some of the effect settings you have applied so as to provide different variations in subtle degrees. The visible result this control provides is dependent on what controls you are working with and what settings are currently engaged. At times no changes will be apparent as certain controls may be set to off or lower settings making visible changes negligible."
HelpID('') ""
NameID('SSUN') "Surface Sheen"
DescID('SSUQ') "The Surface Sheen slider controls how much gloss you see on the surface of the effect. Adjusting the lighting controls will impact the way the sheen reflects both the ambient and the cast lighting that is placed on the effect."
HelpID('') ""
NameID('SSWN') "Sheen Width"
DescID('SSWQ') "The Sheen Width slider controls the spread of the sheen on the surface. Increasing this setting spreads the reflective sheen across a wider areas. A reduced setting tightens the width for a narrow, more concentrated sheen area."
HelpID('') ""
NameID('SSFN') "Surface Color"
DescID('SSFQ') "The Surface Color slider and color box controls the opacity and color settings applied to the background color of an effect. As you increase the slider the opacity of the color increases and more of this is shown ontop of any existing image in the background."
HelpID('') ""
NameID('RFS1') "Reflective Strength"
DescID('RFS2') "The Reflective slider adjusts the opacity and reflective qualities of the Reflection Map. Reduce the strength of this setting to create semi-transparent depth effects. Having the Apply Background Image Checkbox option turned on is advisable when using this slider as it shows the background image under the semi-transparent areas of the effect."
HelpID('') ""
NameID('SHUN') "Hue Color Adjustment"
DescID('SHUQ') "The Hue color slider shifts the color values of the image across a color spectrum. This control allows you to shift the colors of the artwork while not affecting the lightness or saturation."
HelpID('') ""
NameID('SSAN') "Color Saturation Adjustment"
DescID('SSAQ') "The Saturation slider makes the colors in the image more or less vibrant. This control is useful for making an images colors pop while not affecting the overall tone or lightness."
HelpID('') ""
NameID('SLUN') "Image Luminance Adjustment"
DescID('SLUQ') "The Luminance slider adjusts the luminance or light qualities in an image to either darken or lighten the image."
HelpID('') ""
NameID('Tlum') "Texture Map Luminance Adjustment"
DescID('Tlm1') "The Luminance slider adjusts the luminance or light qualities in a Texture Map to either darken or lighten the Texture."
HelpID('') ""
NameID('StLm') "Reflection Luminance Adjustment"
DescID('StL1') "The Luminance slider adjusts the luminance or light qualities in a Reflection Map to either darken or lighten the Reflection."
HelpID('') ""
NameID('ELum') "Environment Map Luminance Adjustment"
DescID('ELm1') "The Luminance slider adjusts the luminance or light qualities in a Environment Map to either darken or lighten the Environment."
HelpID('') ""
NameID('ESfm') "Soften Environment Map"
DescID('ESf1') "The Softness slider will soften the selected Environment Map making it look out of focus."
HelpID('') ""
NameID('SSON') "Soften Reflection"
DescID('SSOQ') "The Softness slider will soften the selected Reflection Map making it look out of focus."
HelpID('') ""
NameID('Tstm') "Soften Texture Map"
DescID('Tst1') "The Softness slider will soften the selected Texture Map making it look out of focus."
HelpID('') ""
NameID('ErmP') "Rotate Environment Map"
DescID('Erm1') "The Environment Map Orientation menu allows you to rotate the map direction in specified directional increments. You may also flip the orientation horizontally or vertically."
HelpID('') ""
NameID('EtrM') "Rotate Texture Map"
DescID('Etr1') "The Texture Map Orientation menu allows you to rotate the map direction in specified directional increments. You may also flip the orientation horizontally or vertically."
HelpID('') ""
NameID('SrrM') "Rotate Surface Map"
DescID('SrM1') "The Surface Map Orientation menu allows you to rotate the map direction in specified directional increments. You may also flip the orientation horizontally or vertically."
HelpID('') ""
NameID('MRIN') "Rotate Image Map"
DescID('MRIQ') "The Rotate Image Map menu allows you to rotate the map direction in specified directional increments. You may also flip the orientation horizontally or vertically."
HelpID('') ""
NameID('SRVN') "Refractive Strength"
DescID('SRVQ') "The Refractive slider increases or decreases the amount of image refraction that occurs in the effect. Refraction is the bending of light as it passes through a transparent material. Refracting bends the image and distorts it through the surface bevel and surface texture only when the Reflective Opacity slider is reduced to make the surface semi-transparent. In the simplest of terms, depth effects that are semi-transparent that have a refraction setting will bend the background image as it is seen through the surface."
HelpID('') ""
NameID('SSSN') "Surface Strength"
DescID('SSSQ') "The Surface Strength slider adjusts the amount of surface texture and height you want to apply to the effect. Positive slider settings raise the surface texture up while negative setting press the surface texture into the artwork."
HelpID('') ""
NameID('SISN') "Surface Imprint Size"
DescID('SISQ') "The Surface Imprint Size slider adjusts the size of the surface texture map. Higher settings increase the size of the texture map while lower settings reduce it."
HelpID('') ""
NameID('MRSN') "Rotate Reflection Map"
DescID('MRSQ') "The Rotate Reflection Map menu allows you to rotate the map direction in specified directional increments. You may also flip the orientation horizontally or vertically."
HelpID('') ""
NameID('E001') "Glassiness"
DescID('E002') "The Glassiness control adjusts the other sliders into ranges to make the light look glassy.  If you already have your settings at the optimal place adjustments to this control will yield little to no visual result. The best place to see the changes from this control is on curvy surfaces created by bevel depth."
HelpID('') ""
NameID('E003') "Environment Opacity"
DescID('E004') "The Environment Opacity controls how much of the glassy environment map shows through the effect. The higher the setting the stronger the environment map will show. Usually a setting between 25 and 50 is sufficient to generate a good shine."
HelpID('') ""
NameID('E005') "Environment Menu"
DescID('E006') "The Environment Menu allows you to load up different environment maps that generate the surface reflections. You may select from one of the installed maps or load up your own creation using the Load Custom Map option. You can use any image that has lots of shiney surfaces on it. Photos of chrome work excellently!"
HelpID('') ""
NameID('E007') "Texture Opacity"
DescID('E008') "The Texture Opacity controls how opaque the selected texture map appears."
HelpID('') ""
NameID('E009') "Texture Map Menu"
DescID('E010') "The Texture Map menu allows you to load up different texture maps that will be used as the background surface behind the environment map. You may select from one of the installed maps or load up your own creation using the Load Custom Map option. You can use any Seamless texture for a Texture Map."
HelpID('') ""
NameID('E011') "Scale Map"
DescID('E012') "The Scale slider will reduce or enlarge the seamless Texture Map that you have loaded up as a background for your effect."
HelpID('') ""
NameID('ULSN') "Lighting Sphere"
DescID('ULSQ') "The Light Sphere is very easy to use and understand. On the Light Sphere you will see a circle. This is called a Light Point. The Light Point represents a source of light. It is used to set the direction and height of the light as it shines on the effect. If multiple Light Points are in use, the active light point will be circled in red. The Shadow Point (located on the Shadow Sphere) that corresponds to the Light Point is also highlighted in red and will automatically move when the Light Point is moved. If the Light Point were in the middle of the sphere then this would represent a light being placed directly above the effect. You would see very little shading as overhead lights do not cast shadows and remove most of the shading from an effect. As the Light Point is moved towards the outer edge of the Light Sphere the height of the light is lowered and more shading and cast shadows will appear."
HelpID('') ""
NameID('USSN') "Shadow Sphere"
DescID('USSQ') "The Shadow Sphere is used to control the shadows that are generated under certain types of effects. Shadow Points are used to control the individual shadows. An effect can have multiple shadows that represent multiple light sources being cast from different directions and at different intensities. When the Link Lighting to Shadows option is turned on the Shadow Points are created and controlled automatically by the Light Sphere. When this option is turned off you can click on the Shadow Sphere to create new Shadow Points or adjust existing shadow points by dragging them around and / or adjusting their settings using the shadow controls. You may have multiple Shadow Points, each with independent settings that allow you to simulate real world shading with primary and softer secondary shadows that are generated from multiple light sources. Shadow control sliders adjust the currently selected Shadow Point."
HelpID('') ""
NameID('UALN') "Add Light Point"
DescID('UALQ') "Click the Add Light Point button to add a new Light Point to the Light Sphere."
HelpID('') ""
NameID('UDLN') "Delete Light Point"
DescID('UDLQ') "Click the Delete Light Point button to delete the currently selected Light Point from the Light Sphere. When a Light Point is deleted the corresponding Shadow Point is deleted (unless the Link Lighting to Shadows checkbox is turned off)."
HelpID('') ""
NameID('UASN') "Add Shadow Point"
DescID('UASQ') "Click the Add Shadow Point button to add a new Shadow Point to the Shadow Sphere. This control is only active if the Link Lighting to Shadows checkbox is turned off."
HelpID('') ""
NameID('UDSN') "Delete Shadow Point"
DescID('UDSQ') "Click the Delete Shadow Point button to delete the currently selected Shadow Point from the Shadow Sphere. This control is only active if the Link Lighting to Shadows checkbox is turned off."
HelpID('') ""
NameID('CLLN') "Link Lighting to Shadows"
DescID('CLLQ') "DreamSuite allows you to automatically create shadows that match the light direction and shading that is generated by the Light Points. When the Link Lighting to Shadows checkbox is on whenever you create a new Light Point or change the direction of an existing Light Point, the corresponding Shadow Point is generated or adjusted, respectively. If you uncheck this option you are able to create new Light Points without adding new shadows and you can also create new shadows that have no Light Points associated with them. If you uncheck this option and create new Shadow Points on the Shadow Sphere and then check this option back on you custom adjustments and Shadow Points are hidden but are still retained and will be shown again if the checkbox is turned off again."
HelpID('') ""
NameID('CDSN') "Display Shadows"
DescID('CDSQ') "The Display Shadows checkbox turns the effect shadows on or off. When this checkbox is on the shadows formed by this effect will be saved or applied with the effect. If you do not want shadows on your effect turn off this checkbox."
HelpID('') ""
NameID('SLCN') "Light Color / Opacity"
DescID('SLCQ') "The Light Color / Opacity slider controls the color and opacity of the light that is emitted by the currently selected Light Point. The lower the opacity, the more the light fades into the artwork it shines upon and is less visible. The Light Color button at the end of the slider gives you access to the color picker so you can choose the color tint of the light. Click on the button and the color picker window will appear. the color you set will tint the effect as if the light source were shining through a colored piece of glass."
HelpID('') ""
NameID('SALN') "Ambient Light"
DescID('SALQ') "The Ambient Light Source slider controls the strength of the ambient light that is reflecting around the effect. Ambient light does not come from any one source or direction but is instead represents light that is reflected from existing sources. Adjusting the ambient light will change the effect lighting evenly. The Ambient Color button at the end of the slider gives you access to the color picker so you can choose the color tint of the ambient light. Click on the button and the color picker window will appear. To better understand ambient light, imagine shining a flashlight at a wall in a dark room. The light coming from the flashlight would represent the Light Point that you place on the sphere. The ambient light would be the light that is bounced off the wall and lights up the rest of the room."
HelpID('') ""
NameID('SGSN') "Glare Strength"
DescID('SGSQ') "The Glare Strength slider controls how much glare is generated for effects that have lighting directly over an effect (Light Points positioned in the center of the Light Sphere). The glare that is cast back from the effect when the light strikes it is controlled with this slider. Reducing this Glare Strength setting reduces the amount of glare that you see when the light is positioned over or above an effect. Glare can occur when a relatively smooth surface reflects a light that is nearly directly overhead, causing Sheen to cover nearly the entire surface."
HelpID('') ""
NameID('SSCN') "Shadow Color / Opacity"
DescID('SSCQ') "The Shadow Point Color and Opacity control sets both the color and the opacity for the currently highlighted Shadow Point. Changing this slider to a lower setting will make the shadow more transparent."
HelpID('') ""
NameID('SSHN') "Shadow Height"
DescID('SSHQ') "The Shadow Height slider offsets the shadow so the image appears to be higher above the shadow."
HelpID('') ""
NameID('SSNN') "Shadow Softness"
DescID('SSNQ') "The Shadow Softness slider controls how hard or soft your shadows are. Increasing the settings of this slider make the shadow fade out in a softer, more gradual manner over a greater distance. Reducing this setting retracts the shadow to a harder shape with a shorter fade out distance along the edges."
HelpID('') ""
NameID('CBS1') "Balance Shading"
DescID('CBSN') "The Balance Shading checkbox option forces the overall effect to retain its original brightness level, regardless of the number of Light Points that are added. Checking the 'Balance Shading' option ensures that a normal, flat surface will retain the same brightness as the original image even though the overall lighting level is increased or decreased significantly."
HelpID('') ""
NameID('CIPN') "Illuminate Photo"
DescID('CIPQ') "The Illuminate Photo checkbox controls whether the lighting in this effect will spill over onto the image. Certain settings in this effect will alter the lighting on both the effect and on the image in subtle ways to blend the two together in a realistic manner. If you want to protect your image from these subtle changes, uncheck this option."
HelpID('') ""
NameID('TSBN') "Splatter Brush"
DescID('TSBQ') "Draw with the Splatter brush to create splats of metal along the path. Random splatter shapes will be generated as you draw. Use the brush size, feather and opacity controls to adjust the splats. Remove splats with the Remove Metal Brush."
HelpID('') ""
NameID('TAMN') "Add Metal Brush"
DescID('TAMQ') "The Add Metal Brush  will draw metal from its nozzle using the current slider and menu settings."
HelpID('') ""
NameID('TRMN') "Remove Metal Brush"
DescID('TRMQ') "The Remove Metal Brush will remove the currently targeted metal that it is brushed over."
HelpID('') ""
NameID('TBSN') "Brush Size Controls"
DescID('TBSQ') "Click on this small horizontal slider to access the brush size control. As you adjust the size control you will be shown a brush attributes window. The brush attributes window displays the actual size, opacity and feather attributes of the brush as they will be applied when you brush."
HelpID('') ""
NameID('TBFN') "Brush Feather Controls"
DescID('TBFQ') "Click on this small vertical slider to access the brush feather control. As you adjust the feather control you will be shown a brush attributes window. The brush attributes window displays the actual size, opacity and feather attributes of the brush as they will be applied when you brush."
HelpID('') ""
NameID('TBON') "Brush Opacity Controls"
DescID('TBOQ') "Click on this small vertical slider to access the brush opacity control. As you adjust the feather control you will be shown a brush attributes window. The brush attributes window displays the actual size, opacity and feather attributes of the brush as they will be applied when you brush."
HelpID('') ""
NameID('CCTN') "Confine To Selection"
DescID('CCTQ') "The Confine to Selection checkbox restricts the effect from applying outside the selection. You must have a selection on your image in order to use this option."
HelpID('') ""
NameID('1C01') "Auto Fill"
DescID('1C02') "Metal Mixer will automatically mix together Metal 1 and Metal 2 when you press this button,"
HelpID('') ""
NameID('1C03') "Clear Auto Fill Metals"
DescID('1C04') "This button removes the Auto Mixed metals and lets you start again fresh."
HelpID('') ""
NameID('1C05') "Fill Volume"
DescID('1C06') "The Fill Volume slider controls how much of Metal 2 will be placed inside Metal 1 when you use the Auto Fill option."
HelpID('') ""
NameID('1C07') "Currently Selected Metal"
DescID('1C08') "The Metal menu allows you to select the current metal the controls work with. Use this menu to select the metal you desire to paint with. All changes you make to the Surface controls will adjust the currently selected metal attributes and will automatically update the effect."
HelpID('') ""
NameID('1C11') "New Metal"
DescID('1C12') "Metal Mixer allows you to have as many different surfaces as you want. Click this button to create a new metal that will appear under the Metal Menu."
HelpID('') ""
NameID('SRFN') "Reflective Opacity"
DescID('SRFQ') "The Reflective slider adjusts the opacity and reflective qualities of the Reflection Map. Reduce the strength of this setting to create semi-transparent depth effects. Having the Apply Background Image Checkbox option turned on is advisable when using this slider as it shows the background image under the semi-transparent areas of the effect."
HelpID('') ""
NameID('SFCN') "Frame Color"
DescID('SFCQ') "The Frame Color slider and color picker are used to define the color and how strongly this is applied to the frame. The underlying color of the frame is always white. As you move the Frame Color slider to the left the color becomes transparent and blends into the white to form a soft tint."
HelpID('') ""
NameID('SFAN') "Frame Age"
DescID('SFAQ') "The Frame Age slider applies an aged tint on the frame to simulate what an older frame may look like."
HelpID('') ""
NameID('SIAN') "Image Age"
DescID('SIAQ') "The Image Age slider applies an aged tint on the image to simulate the photo having aged and yellowed."
HelpID('') ""
NameID('SCSN') "Curl Shading"
DescID('SCSQ') "The Curl Shading slider combines intelligent shading and depth shadowing to provide the illusion of depth."
HelpID('') ""
NameID('SEHN') "Edge Height"
DescID('SEHQ') "The Edge Height slider defines the height of the border lip along the area where the image meets the border. This is a very subtle visual effect."
HelpID('') ""
NameID('TEFN') "Edge Fray"
DescID('TEFQ') "The Edge Fray tool bends the outer edges of the image upwards to simulate the edges being bent or frayed. To use the Edge Fray tool start drawing slightly outside the image area and come into the image a small amount. Move the cursor in parallel with the image edge and then move it back outside of the image area and release the mouse button. A fray should appear along the area the tool was drawn. Use the Edge Fray slider to control the strength setting of the next drawn fray. Hold down the following modifier key and trace around a fray area to remove it: Mac: Option Key / Win: Alt Key. Adjustments to the lighting controls will affect the way you see the fray."
HelpID('') ""
NameID('MBTN') "Bevel Type Menu"
DescID('MBTQ') "The Bevel Type menu defines the style of the bevel edging and depth curvature that is applied to the effect."
HelpID('') ""
NameID('SHKN') "Shrink Frame"
DescID('SHKQ') "Adjust this slider to shrink or enlarge the effect in a concentric manner."
HelpID('') ""
NameID('1D01') "Variation"
DescID('1D02') "Variation controls the random generation of settings used to create each effect's distinctive patterns. Changing the Variation value for the effect will provide a unique look each time the setting is changed. In Instamatic the Variation setting is used to generate unique patterns for Edge Fray, Surface Dirt, Curl Shading, the procedural Textures such as Dimpled and Striated, and the Procedural Bevels such as Hammered. "
HelpID('') ""
NameID('TTFN') "Transform Effect"
DescID('TTFQ') "The Transform Effect tool allows you to Select, Move, Scale, Stretch and Rotate effects. To Move an effect click to select it and then place the cursor on the inside of transformation box surrounding the effect and the cursor will display a four sided arrow - once this cursor is displayed click and drag to move the effect to a new location. To Scale place the cursor on one of the corners of the transformation box and it will change to an angled double sided arrow - click and drag to scale (hold the shift key down to constrain the scale to proportional dimensions). To Rotate place the cursor outside of any of the box corner handles and the cursor will display a curved arrow - click and drag the box to the desired angle and release the mouse. To Stretch an effect move the cursor over the box sides and a double sided arrow will appear. Click and drag to stretch the effect in the desired direction and proportion."
HelpID('') ""
NameID('TCEN') "Clone Effect"
DescID('TCEQ') "The Clone Effect tool is used to create new effects that are based on the currently selected effect or if no effect is selected, from the default effect settings. Click onscreen with this tool and a copy of the currently selected effect will be cloned."
HelpID('') ""
NameID('TTPN') "Transform Photo"
DescID('TTPQ') "The Transform Photo tool allows you to Select, Move, Scale, Stretch and Rotate photos that are part of an effect. To Move a photo and reposition it inside the effect use this tool by moving the cursor to the inside of transformation box surrounding the photo and the cursor will display a four sided arrow. Once this cursor is displayed click and drag to move the photo. To Scale the photo place the cursor on one of the corners of the transformation box and it will change to an angled double sided arrow - click and drag to scale (hold the shift key down to constrain the scale to proportional dimensions). To Rotate place the cursor outside of any of the box corner handles and the cursor will display a curved arrow - click and drag the box to the desired angle and release the mouse. To Stretch the photo move the cursor over the box sides and a double sided arrow will appear. Click and drag to stretch the photo in the desired direction and proportion."
HelpID('') ""
NameID('TPPN') "Load Photo"
DescID('TPPQ') "The Load Photo tool is used to replace an image that is inside an effect. When new effects are created they automatically create a copy of the original image into the effect. In most cases you will want to load in another image instead. With this tool selected click over the photo area inside the effect and you will be shown a small onscreen menu that allows you to load a new image, turn the image area transparent or reload the original image."
HelpID('') ""
NameID('TTCN') "Delete Tool"
DescID('TTCQ') "The Delete tool is used to delete effects, paths and ellipses. Select this tool and then click over the item you want to delete. When this tool is active you are shown all effect ellipses and paths from all tools you have used."
HelpID('') ""
NameID('SCRN') "Corner Rounding"
DescID('SCRQ') "The Corner Rounding slider defines the shape of the corners on the currently selected effect. The higher the settings, the more rounded and curved the corners will become."
HelpID('') ""
NameID('1E01') "Create Snaps"
DescID('1E02') "When the Create Snaps checkbox is turned on it will place rivet like snaps on the currently selected 35mm Frame. These rivits simulate the rivits found on the plastic 35mm frames."
HelpID('') ""
NameID('1F01') "Select Border Type"
DescID('1F02') "The Select Border menu is used to define the border style that is applied to the effect."
HelpID('') ""
NameID('SBCN') "Border Color"
DescID('SBCQ') "The Border Color control adjusts the color that is applied to the border. The underlying color of the border is always white. As you move the slider to the left the color becomes transparent and blends into the white to form a tint."
HelpID('') ""
NameID('1F03') "Cut Size"
DescID('1F04') "The Cut Size slider controls the size of the border pattern. Increasing the settings on this slider makes the pattern that is cut around the border larger. Reducing the slider makes the pattern smaller."
HelpID('') ""
NameID('SBSN') "Border Size"
DescID('SBSQ') "The Border Size slider adjusts how much space there is from the edge of the image to the beginning of the Border Pattern. Increasing this slider makes the border wider."
HelpID('') ""
NameID('2341') "Border Age"
DescID('2342') "The Border Age slider applies an aged tint to the border that simulates what occurs when a photo border ages. If you have adjusted the color of the border to something other than the default settings the Border Age control may not produce the desired age effect."
HelpID('') ""
NameID('SSDN') "Surface Dirt"
DescID('SSDQ') "The Surface Dirt slider will add a subtle dirty look to the surface of your effect in the areas that are most visually effective. Use the Variation control to see different areas of coverage."
HelpID('') ""
NameID('1G01') "Color Mix"
DescID('1G02') "The Color Mix control increases or decreases how much of the tone color is mixed in with the effect. In most cases a lower setting is preferred. Try setting different tone colors and opacity settings and then mixing them in with this control."
HelpID('') ""
NameID('1G03') "Halo Softness"
DescID('1G04') "The Halo Softness control spreads the halo out by softening it. Use this control to blend the halo gently into the background."
HelpID('') ""
NameID('1G05') "Halo Intensity"
DescID('1G06') "The Halo Intensity slider adjusts the dark halo that surrounds the selected area. Adjusting this slider will increase or decrease the amount that is applied around the selection."
HelpID('') ""
NameID('1G07') "Mottle Background"
DescID('1G08') "The Mottle Background slider generates a mottled pattern on the background behind the halo. In many images this will help to break up the evenness of the background behind the halo and the toned image."
HelpID('') ""
NameID('1G09') "Halo Color and Opacity"
DescID('1G10') "The Halo Color and opacity control sets both the tone color and opacity that is applied across the entire effect. Try different colors and opacity settings. Also adjust the Color Mix slider to increase or decrease the amount of Tone and Opacity that is applied with the image and halo in this effect. Images with flesh tones generally work best with mid to dark red colors to form a warmer tone ... blue colors work well for applying a cooler tone."
HelpID('') ""
NameID('1G11') "Image Blend"
DescID('1G12') "The Image Blend slider blends the background image into the halo and edges of the toned image."
HelpID('') ""
NameID('1G13') "Image Blur"
DescID('1G14') "The Image Blur slider softens the background image detail by blurring it. This is useful for defocusing the background and drawing more attention to the selected foreground elements. This control is especially useful if the background is detracting from the main subject in the photo."
HelpID('') ""
NameID('1G15') "Glow Inward"
DescID('1G16') "The Glow Inward slider allows the halo to blend inward into the foreground image you have selected."
HelpID('') ""
NameID('1G17') "Soften Selection Mask"
DescID('1G18') "The Soften Selection Mask slider is used to soften the selection mask. Softening the selection mask blends the foreground and background boundaries. Aside from the visual enhancements this slider can create it is also useful for reducing visual artifacts that can be seen from an imperfect selection. "
HelpID('') ""
NameID('1G19') "Ghost Highlight"
DescID('1G20') "The Ghost Highlight slider works with the Ghost Amount slider to create a soft focus, ghosted photo effect. Increasing the slider settings will bring out dramatic colors and detail found in images. Try different combinations of settings with the Ghost Amount, Image Contrast, Soften Mask and Glow Inward controls."
HelpID('') ""
NameID('1G21') "Ghost Amount"
DescID('1G22') "The Ghost Amount slider works with the Ghost Highlight slider to create a soft focus, ghosted photo effect. Increasing this setting creates a stronger ghosting effect on the image as if a slower exposure time were used when taking the photo."
HelpID('') ""
NameID('1G23') "Image Contrast"
DescID('1G24') "The Image Contrast slider will increase the dark and light contrast values of the image. In some photographs the increase of contrast combined with the PhotoTone effect produces a visually dramatic effect."
HelpID('') ""
NameID('1G25') "Variation"
DescID('1G26') "Variation controls the random generation of settings used to create each effect's
distinctive patterns. Changing the Variation value for the effect will provide a unique look each time the setting is changed. In Photo Tone the Variation setting is used to generate unique patterns of light for the Mottle and Halo."
HelpID('') ""
NameID('1H01') "Twirl"
DescID('1H02') "The Twirl brush will rotate the image underneath it's cursor in either a clockwise or counterclockwise direction. The Strength slider controls the direction of the twirl and the amount of twirl that is applied to the image. A possitive setting on the slider twirls the image in a clockwise direction. A negative setting twirls the image in a counterclockwise direction. The higher the setting, the stronger the twirl becomes. Increase the size of the brush to affect a larger area with this tool."
HelpID('') ""
NameID('1H03') "Enlarge / Reduce"
DescID('1H04') "The Enlarge / Reduce brush makes the image underneath it's cursor larger or smaller depending on the setting on the Strength slider. A possitive setting on the Strength slider enlarges the image and a negative setting reduces the image. The higher the setting on the Strength slider the more affect this tool has on the image. Increase the size of the brush to affect a larger area with this tool."
HelpID('') ""
NameID('1H05') "Push / Pull Brush"
DescID('1H06') "The Push / Pull brush allows you to push or pull the image around underneath the cursor. A possitive setting on the Strength slider creates a push affect when this brush is moved onscreen. A negative setting creates a pull affect. The higher the setting on the Strength slider the more affect this tool has on the image. Increase the size of the brush to affect a larger area with this tool."
HelpID('') ""
NameID('1H07') "Iron Out Changes"
DescID('1H08') "The Iron brush will remove any brushed on Putty effects you have applied with the Twirl / Enlarge / Reduce or Push / Pull brushes. As you brush with the Iron tool the image reverts back to its former self. The higher the setting on the Strength slider the stronger the Iron settings become and the more rapidly it reverts the image back to the original version. Increase the size of the brush to affect a larger area with this tool."
HelpID('') ""
NameID('1H13') "Brush Opacity Controls"
DescID('1H14') "The Brush Opacity control sets the strength of the Putty Twirl, Enlarge/Reduce, Push/Pull and Iron tools. The more opaque the stronger the Putty brush influence will be and the more transparent the weaker the influence."
HelpID('') ""
NameID('1H09') "Putty Envelope"
DescID('1H10') "The Putty Envelope draws a rectangular path shape. You may only have one envelope onscreen at a time. On the Envelope path there are predefined points on the center of each side and on the corners. You may adjust these points to change the shape of the image underneath the envelope. Use the Add / Remove Point tool to add or remove points from the Envelope path. You may also use the Convert to corner Point tool on any Envelope points. The Envelope path can transformed (rotated, stretched and moved) and the image under it is transformed based on the same adjustments made to the Envelope. To adjust the points on the Envelope path move the cursor over the point and it changes to allow you to click and select points and adjust the handles or drag to move the point."
HelpID('') ""
NameID('1H11') "Putty Freehand Path"
DescID('1H12') "The Putty Freehand Path tool allows you to draw a path by dragging the cursor along the area you want the path to be formed. When you lift the cursor the path is formed along the area you have traced. After the path has been drawn move the path and it will Putty the image beneath it in the shape of the path and in the direction and distance you have moved it. The Influence slider affects how strong the adjustments to the image are. To adjust points on the path move the cursor over the point and it will change to an Adjust Path cursor. To adjust a handle of a point move the cursor over the handle and it will change into the Adjust Path cursor so you can select and move the handle. To move the path place the cursor over the path and it changes to a Move Path cursor. Click and drag to move the path. If you move the cursor adjacent to the path it will change to a Transform Path tool that allows you to drag and transform the path length and rotation."
HelpID('') ""
NameID('TAPN') "Add / Remove Point Tool"
DescID('TAPQ') "The Add / Remove Point tool adds points to a path or removes existing points from a path. Move the tool over a path and click to add a new point to the path. After the point is added select the main path tool to adjust this point as desired. To remove a point that is on a path move the tool over the point and click. The point will be deleted and the path will redraw itself."
HelpID('') ""
NameID('TCCN') "Convert to Corner Point"
DescID('TCCQ') "The Convert to Corner Point tool converts a point into a corner point. Click over a curved point and it becomes a corner point."
HelpID('') ""
NameID('1H15') "Influence"
DescID('1H16') "The Influence slider controls how much influence the Envelope and Freehand path tools have on the image they are transforming."
HelpID('') ""
NameID('1I03') "Glow 1"
DescID('1I04') "The Glow 1 Opacity and Color control adjusts the first color you see outside the selection. Of the two colors surrounding the selection, it is the one on the inside. This control will allow you to change the color, opacity and amount of the glow distance that is created by this color."
HelpID('') ""
NameID('1I05') "Glow 2"
DescID('1I06') "The Glow 2 Opacity and Color control adjusts the second color you see outside the selection. Of the two colors surrounding the selection, it is the one on the outside. This control will allow you to change the color, opacity and amount of the glow distance that is created by this color."
HelpID('') ""
NameID('1I07') "Blend 1"
DescID('1I08') "Defines the color and the opacity of the blend color that appears at the top of the image."
HelpID('') ""
NameID('1I09') "Blend 2"
DescID('1I10') "Defines the color and the opacity of the blend color that appears at the bottom of the image."
HelpID('') ""
NameID('1I11') "Vibrancy"
DescID('1I12') "Use the Vibrancy slider to increase the distance and intensity of the glow that is generated by both the inner and the outer colors around the HotStamp selection."
HelpID('') ""
NameID('1I13') "Roughness"
DescID('1I14') "Use the Roughness slider to roughen the edges of the selection."
HelpID('') ""
NameID('1I15') "Glow Offset Sphere"
DescID('1I16') "Adjust the Glow Direction point on this sphere to define the offset direction of the glow. The glow will move in the same direction as the sphere control. This control works in conjunction with the Glow Strength slider to determine how far out and in what direction the glow occurs."
HelpID('') ""
NameID('SGCN') "Glow Color and Opacity"
DescID('SGCQ') "The Glow Color and Opacity control defines the color and opacity of the glow. Reducing the slider will reduce the opacity of the glow making it more transparent. Clicking on the color button will activate the color picker so you may change the glow color."
HelpID('') ""
NameID('SGTN') "Glow Amount"
DescID('SGTQ') "The Glow Amount slider adjusts the amount of glow you see around the effect. The higher the slider setting the farther the glow extends from the effect."
HelpID('') ""
NameID('SGLN') "Glow Softness"
DescID('SGLQ') "The Glow Softness slider adjusts how soft the glow effect is. The softer the effect the more spread out, smooth and feathered it becomes."
HelpID('') ""
NameID('SGLN') "Glow Softness"
DescID('SGLQ') "The Glow Softness slider adjusts how soft the glow effect is. The softer the effect the more spread out, smooth and feathered it becomes."
HelpID('') ""
NameID('1J01') "Transform Ripple Ellipse"
DescID('1J02') "Using the Transform Ripple Ellipse tool you are able to move the Ripple Ellipse by clicking over the center and dragging it. To rotate the direction of the ripple place the cursor just outside the Ellipse and you will be given rotational control. To make the ripple angle at a perspective adjust the outer path inward to shape the ripple into an oval. Adjust the inner path to define the compression distance from the center of the ripple making the ripples inside the circle tighter and more compact."
HelpID('') ""
NameID('1J03') "Create Ripple"
DescID('1J04') "Use the Create Ripple tool to create new ripples. Click onscreen and a new Ripple Ellipse is generated under the cursor. Ripples interact with each other where they intersect. Try placing a portion of a Ripple Ellipse over another ripple and watch what happens."
HelpID('') ""
NameID('1J05') "Ripple Type"
DescID('1J06') "Use the Ripple Type menu to select the type of Ripple you want to apply. Circular ripples resemble the effect you get if you drop a stone into water. Linear waves (need descriptive assistance). Random swell (need descriptive assistance)."
HelpID('') ""
NameID('1J07') "Wavelength"
DescID('1J08') "The Wavelength slider controls how close together the waves are spaced. The lower the setting, the closer together the waves become."
HelpID('') ""
NameID('1J09') "Height"
DescID('1J10') "The Height slider controls the perceived height of the wave. Increasing the settings of this slider makes the ripples appear to be higher."
HelpID('') ""
NameID('1J11') "Compression"
DescID('1J12') "The Compression slider controls the age of the ripples as they travel from the center of the effect. As waves age they spread out more. Compression provides you with control over  this aspect of the effect."
HelpID('') ""
NameID('1J13') "Wave Shape"
DescID('1J14') "Use the Wave Shape menu to control the shape of the ripple as it travels. Choices are Smooth Shape, Peaked Waves, Outward Waves and Inward Waves."
HelpID('') ""
NameID('1J15') "Phase"
DescID('1J16') "The Phase slider controls the position of the wave crests relative to the center of the ripple. Larger values move the crests further out from the center."
HelpID('') ""
NameID('1J17') "Movement"
DescID('1J18') "The Movement slider controls how much the background image is distorted by the ripple's uneven surface. Depending on how the Ripple is placed, the background image may either visually represent a scene reflected from the surface of the waves or refracted through them. By adjusting the Movement slider the user can control how clear or distorted this image becomes."
HelpID('') ""
NameID('1J19') "Disorder"
DescID('1J20') "The Disorder slider displaces each ripple crest randomly, giving the ripples an uneven, real-world appearance."
HelpID('') ""
NameID('1J21') "Variation"
DescID('1J22') "Variation controls the random generation of settings used to create each effect's distinctive patterns. Changing the Variation value for the effect will provide a unique look each time the setting is changed. In Ripple the Variation setting is used to generate unique patterns for Disorder and The Random Swell ripple type."
HelpID('') ""
NameID('TFPN') "Freehand Path"
DescID('TFPQ') "The Freehand Path tool allows you to draw a path by dragging the cursor along the area you want the path to be formed. When you lift the cursor the path is formed along the area you have traced. If the effect you are using this tool with requires that the path be closed then you must close the path by ending the traced area next to the starting point. The path will automatically snap together when you lift the mouse if it is close to the starting point where you began the trace. To adjust points on the path move the cursor over the point and it will change to an Adjust Path cursor. To adjust a handle of a point move the cursor over the handle and it will change into the Adjust Path cursor so you can select and move the handle. To move the path place the cursor over the path and it changes to a Move Path cursor. Click and drag to move the path. If you move the cursor adjacent to the path it will change to a Transform Path tool that allows you to drag and transform the path length and rotation."
HelpID('') ""
NameID('1K01') "Accent Tears"
DescID('1K02') "The Accent Tears tool is used to draw small tears on the edges of the deckle that you have created. To use this tool you should start the path directly over the deckle path and move it inward in a slightly irregular direction. Once you have drawn an Accent Tear path use the Tearing Path slider to control the width of the Tear. The Path Transformation and Editing tool can adjust the Tear paths you create."
HelpID('') ""
NameID('TAPN') "Add / Remove Point Tool"
DescID('TAPQ') "The Add / Remove Point tool adds points to a path or removes existing points from a path. Move the tool over a path and click to add a new point to the path. After the point is added select the main path tool to adjust this point as desired. To remove a point that is on a path move the tool over the point and click. The point will be deleted and the path will redraw itself."
HelpID('') ""
NameID('TCCN') "Convert to Corner Point"
DescID('TCCQ') "The Convert to Corner Point tool converts a point into a corner point. Click over a curved point and it becomes a corner point."
HelpID('') ""
NameID('1K03') "Fill Bucket"
DescID('1K04') "Click this bucket tool over any areas of the image you want to have removed. If you draw a deckle path down the middle of a photo only part of the photo will be removed by the deckle. Use this tool to click on top of the remaining areas of the photo you desire to have removed."
HelpID('') ""
NameID('1K05') "Deckle Direction On Path"
DescID('1K06') "The Deckle Direction menu allows you to control which side of the path it deckles on. If you select Deckle Inside of Path the deckle will be shown on the inside of the path and the area outside of the path is removed. If you select Deckle Outside of Path the area inside the path is removed and the deckle and photo outside of the path is kept. After you have drawn your deckle path using the Freehand Path tool you may change the Deckle Direction or you may set the direction prior to drawing your path."
HelpID('') ""
NameID('SPVN') "Path Variation"
DescID('SPVQ') "Path Variation randomizes the path and adds irregular deviations from the path you draw. You may either adjust this control before or after you have drawn your path."
HelpID('') ""
NameID('1K07') "Deckle Mask Selection"
DescID('1K08') "When the Deckle Mask Selection option is turned on a deckle will automatically be applied to a selection if one is present. This option is useful if you want to create the selection using type or a graphic shape. Deckle will trace along the edges of the selection and apply the effect. Intricate shapes may not work well with this effect ... small type or detail on a graphic may be absorbed in the deckle effect."
HelpID('') ""
NameID('dRt0') "Deckle Mask Selection Direction"
DescID('dRt1') "The Deckle Direction menu allows you to control which side of the path it deckles on. If you select Deckle Inside of Path the deckle will be shown on the inside of the path and the area outside of the path is removed."
HelpID('') ""
NameID('1K09') "Deckle Width"
DescID('1K10') "The Deckle Width slider controls how wide the deckle shows up on the edges of your artwork. The width will not exceed the maximum range you have set this slider to. Use this control in conjunction with the Deckle Variation slider to define the width variation range for the deckle."
HelpID('') ""
NameID('1K11') "Deckle Irregularity"
DescID('1K12') "The Deckle Irregularity slider controls the variation in width that is applied as the deckle effect is generated on your image. Use this in conjunction with the Deckle Width control to define the deckle size parameters throughout the effect."
HelpID('') ""
NameID('1K13') "Removal Distance"
DescID('1K14') "After you have drawn a deckle path the effect removes pixels around the path. The Removal Distance slider determines how far out from the path pixels are removed. The higher the setting, the farther deckle goes."
HelpID('') ""
NameID('2K13') "Fiber Density"
DescID('2K14') "The Fiber Density slider controls the amount of fiber that is shown along the edge of the deckle. Fiber is an important visual component of the effect. The more dense the fiber the stronger this aspect will show up when the effect is generated."
HelpID('') ""
NameID('1K15') "Fiber Length"
DescID('1K16') "The Fiber Length slider controls how far the fiber strands are allowed to go both inside and outside of the deckle path."
HelpID('') ""
NameID('1K17') "Fiber Roughness"
DescID('1K18') "The Fiber Roughness slider controls the courseness of the fibers as they are rendered on the deckle effect."
HelpID('') ""
NameID('1K19') "Deckle Color Blend"
DescID('1K20') "The Deckle Color Blend control allows you to set the colors that are used to blend from the edge of the deckle inward toward the image. The color to the left represents the outer edge of the deckle and the color on the right represents the color closest to the image. To use this control double click anywhere on the slider above the gradient to create a new gradient color control. Slide this triangle control left or right to blend the color with adjacent gradient blends. Double click on the triangle to open the color picker and change the blend color. To delete a triangle click on it and then press the delete key."
HelpID('') ""
NameID('1K21') "Image Blending"
DescID('1K22') "The Image Blend slider blends the image colors through the deckle areas. As you reduce this slider from 100% you will begin to see the image through the deckle."
HelpID('') ""
NameID('1K23') "Curl Shading"
DescID('1K24') "Curl Shading adds depth to the surface around the tear, which will be shaded and shadowed giving the image the apearance to being pulled upward or twisted by the tear."
HelpID('') ""
NameID('1K25') "Variation"
DescID('1K26') "Variation controls the random generation of settings used to create each effect's distinctive patterns. Changing the Variation value for the effect will provide a unique look each time the setting is changed. In Deckle the Variation setting is used to generate unique placement of fibers, the height and shading of the irregular torn edge, and the Path Variation."
HelpID('') ""
NameID('1K27') "Surface Texture"
DescID('1K28') "The Surface Texture control intensifies the shading and roughness of the deckle surface."
HelpID('') ""
NameID('1L01') "Clone Tape"
DescID('1L02') "Use the Clone Tape tool to clone the currently selected tape effect. Use the Clone Tape tool to add more strips of tape to your image."
HelpID('') ""
NameID('1L03') "Fray Tape Edge"
DescID('1L04') "The Fray Tape Edge tool is used to fray the edges of the tape upwards to simulate the tape curling up along the sides. To use this tool start drawing slightly outside the tape and come into the tape while running the cursor in parallel with the tape edge. After a short distance trace back out again. Use the Fray slider to control the strength setting of the frays that you have drawn. Hold down the following modifier key and trace around a fray area to remove it: Mac: Option Key / Win: Alt Key. Adjustments to the lighting controls will affect the way you see the fray."
HelpID('') ""
NameID('1L05') "Tear Tape"
DescID('1L06') "Use the Tear Tape tool to tear holes in the tape and to rip the ends of the tape to simulate hand tearing of the tape. Use the Crumple Tears slider to adjust the crumples that are applied along the edges of the tear generated by this tool. To remove or modify a tear that you have created hold down on the following modifier key and trace around it: Mac: Option Key / Win: Alt Key. Use the Crumple Tears slider to modify the amount of crumple that occurs around the edge of the tear."
HelpID('') ""
NameID('1L11') "Tape Age"
DescID('1L12') "The Tape Age slider adds a yellow aged look to the currently selected tape effect. If you have changed the default color of the tape using the Tape Color control, Tape Age may not yield the desired aged look."
HelpID('') ""
NameID('1L13') "Curl"
DescID('1L14') "Use the Curl slider to give the ends of the tape a shaded curling effect. This control is best used at lower settings."
HelpID('') ""
NameID('1L15') "Distortion"
DescID('1L16') "The Distortion slider adjusts Tape strips that have a curl, wrinkle or fray setting so that it is raised from the normally flat surface. Essentially, the tapes length is being pulled in to provide the bends in height based on the curl, wrinkle and fray settings currently in use on the tape strip."
HelpID('') ""
NameID('1L17') "Perspective"
DescID('1L18') "The Perspective slider bends the strip of tape to provide added dimension."
HelpID('') ""
NameID('1L19') "Crumple Tears"
DescID('1L20') "The Crumple Tears slider determines how many crumple folds are placed along the edge of the tape when you use the Tear Tape tool. You must have created a tear on the currently selected tape prior to using this control or you will see no result."
HelpID('') ""
NameID('1L21') "Serration Size"
DescID('1L22') "The Serration Size slider reduces or enlarges the size of the serrated cuts along the ends of the tape effect you currently have selected. If you have removed the serrated ends of the tape by using the tear tool, this control will not function."
HelpID('') ""
NameID('1L23') "Wrinkles"
DescID('1L24') "Use the Wrinkles slider to make your tape surface wrinkled and wavy. This feature is best used at lower settings for optimal results.Use this slider in conjunction with the Wrinkle Size control."
HelpID('') ""
NameID('1L25') "Wrinkle Size"
DescID('1L26') "The Wrinkle Size slider adjusts how large the wrinkles that are applied to the image are. Use this slider in conjunction with the Wrinkles control."
HelpID('') ""
NameID('1L27') "Fray"
DescID('1L28') "The Fray slider works in conjunction with the Fray Tape Edge tool. Higher settings create a stronger perception of depth for the fray. This slider will adjust all frays on the currently selected tape effect."
HelpID('') ""
NameID('1L29') "Overlap Opacity"
DescID('1L30') "When a strip of tape is placed over another strip of tape or along the edge or corner of an image it shows lines where it overlaps the edges of what is under it. The Overlap Opacity control defines how strongly this overlap is shown."
HelpID('') ""
NameID('1L31') "Overlap Softness"
DescID('1L32') "The Overlap Softness slider makes any overlapping lines shown on the tape softer and more gradual as the setting is increased in strength."
HelpID('') ""
NameID('Drt1') "Surface Dirt"
DescID('Drt2') "The Surface Dirt slider will add a subtle dirty look to the surface of your effect in the areas that are most visually effective. Use the Variation control to see different areas of coverage."
HelpID('') ""
NameID('1M01') "Cubism Shape"
DescID('1M02') "The Shapes menu allows you to change the shape of the Cubism effect. Your choices are squares, triangles, pentagons and hexagons."
HelpID('') ""
NameID('1M03') "Size of Shapes"
DescID('1M04') "The Size slider controls how large or small the shapes appear on your document."
HelpID('') ""
NameID('1M05') "Saturation"
DescID('1M06') "The Saturation slider reduces the amount of color shown through the shape. The lower the setting the less color you will see."
HelpID('') ""
NameID('1M07') "Transparent Shape"
DescID('1M08') "When the Transparent Shapes option is on the shapes are semi-transparent and blend together. When this option is off the shapes are formed of solid colors that are derived from the image."
HelpID('') ""
NameID('CCSN') "Confine to Selection"
DescID('CCSQ') "The Confine to Selection checkbox restricts the effect from applying outside the selection. You must have a selection on your image in order to use this option."
HelpID('') ""
NameID('1N01') "Chisel Depth Menu"
DescID('1N02') "This menu allows you to change the type of bevel depth that is applied to the chisel effect."
HelpID('') ""
NameID('1N03') "Edge Radius"
DescID('1N04') "This slider controls how sharply the chisel angle appears within the selection."
HelpID('') ""
NameID('1N05') "Polish"
DescID('1N06') "This slider rounds and smoothes the angles of the chisel. Lower settings allow more of the chisel lines to show simulating the chisel effect."
HelpID('') ""
NameID('1N07') "Depth"
DescID('1N08') "This control determines the height of the chisel. Increasing the value of this slider makes the chisel appear higher."
HelpID('') ""
NameID('1N09') "Tint Color"
DescID('1N10') "The Tint Color slider and color box allows you to add a color tint across the chisel effect. Use the color box to change the color of the tint that is applied to the bevel. The slider is used to reduce the opacity of the tint."
HelpID('') ""
NameID('1N11') "Bevel In"
DescID('1N12') "When the Bevel In option is checked on the bevel will appear to go inward instead of going out and up from the surface."
HelpID('') ""
NameID('1N13') "Polish Lip"
DescID('1N14') "The Polish Lip option smooths the edges of the mask to remove artifacts that may prevent a smooth bevel from being formed."
HelpID('') ""
NameID('1O01') "Flake Crack"
DescID('1O02') "Use this lasso tool to either click over a crack or to draw around a group of cracks to have them flake off. Use the Flake Shows Imprint checkbox option to have a ghost of the image left on the canvas surface from where the crack flaked off."
HelpID('') ""
NameID('1O03') "Crackle Type Menu"
DescID('1O04') "The Crackle Type menu allows you to choose from two styles of cracks: Paint and Mud."
HelpID('') ""
NameID('1O05') "Spacing Distance"
DescID('1O06') "This slider controls how close together the cracks are generated. Higher settings generate more space between the cracks. Lower settings produce smaller cracks with less space between them."
HelpID('') ""
NameID('1O07') "Crack Irregularity"
DescID('1O08') "As the cracks are generated they use this control setting to determine how much of irregularity in the pattern there is. Higher settings produce more irregularity in the way the cracks are formed."
HelpID('') ""
NameID('1O09') "Separation"
DescID('1O10') "The Separation slider controls how thick the cracks are as they separate from the canvas."
HelpID('') ""
NameID('1O11') "Crack Opacity"
DescID('1O12') "The Crack Opacity slider controls the opacity of the cracks. The lower the setting the less apparent the cracks appear to be."
HelpID('') ""
NameID('1O13') "Crack Depth"
DescID('1O14') "The Crack Depth slider adds a perceived height to the areas generated around the cracks."
HelpID('') ""
NameID('1O15') "Curl Depth"
DescID('1O16') "The Curl Depth slider adjusts the amount of depth shading that is rendered across each section of the image between the cracks."
HelpID('') ""
NameID('1O17') "Branching"
DescID('1O18') "The Branching slider controls how the cracks grow and branch out as they are generated. Higher settings create more branches."
HelpID('') ""
NameID('1O19') "Canvas Sensitivity"
DescID('1O20') "The Canvas Sensitivity slider makes the cracks form in a relational pattern to an underlying canvas. When paint ages and cracks on canvas the surface texture of the canvas influences the way in which the cracks form. The higher the setting on this slider the more sensitive the cracks are to forming in a relational pattern to paint cracking from canvas."
HelpID('') ""
NameID('1P25') "Perspective"
DescID('1P26') "The Perspective slider controls the strength of the fold and crease perspective as it bends the image."
HelpID('') ""
NameID('1P27') "Opacity"
DescID('1P28') "The Opacity slider controls the degree in which the Crease shading is seen on the image. Higher settings show more shading while lower settings may remove most of the depth and shading from the image."
HelpID('') ""
NameID('1P29') "Draw Straight Line"
DescID('1P30') "When this option is checked on the Crease tool will draw a straight line. Alternatively you can hold down the Shift key while drawing and temporarily draw with a straight line."
HelpID('') ""
NameID('1P31') "Variation"
DescID('1P32') "Variation controls the random generation of settings used to create each effect's distinctive patterns. Changing the Variation value for the effect will provide a unique look each time the setting is changed. In Crease the Variation setting is used to generate unique patterns for the Wrinkles around each crease type, for the Crumples and irregular Bumps."
HelpID('') ""
NameID('1Q01') "Crumple"
DescID('1Q02') "Use the Crumple tool to add a crumpled look to the surface of your photo. Circle an area with the Crumple lasso to define the area you want to be crumpled. Use the Edge Tool Depth, Edge Tool Scale and the Edge Tool Opacity sliders to control the Crumple (make sure Global Slider Changes is checked on if you are adjusting the settings after you have drawn with the tool). Hold down the following modifier key and trace around a crumple area to remove it: Mac: Option Key / Win: Alt Key."
HelpID('') ""
NameID('1Q03') "Fray"
DescID('1Q04') "The Fray tool is used to fray the edges of the image or border. To use this tool start drawing slightly outside the image or border and come into the image or border while running the cursor in parallel with the edge. After a short distance trace back outside again. Use the Edge Tool Depth, Edge Tool Scale and the Edge Tool Opacity sliders to control the Fray (make sure Global Slider Changes is checked on if you are adjusting the settings after you have drawn with the tool).  Hold down the following modifier key and trace around the effect area to remove it: Mac: Option Key / Win: Alt Key. Adjustments to the lighting controls will affect the way you see the fray."
HelpID('') ""
NameID('1Q05') "Add Bulge"
DescID('1Q06') "The Add Bulge brush is used to lift up the image in a localized area. Use the Bulge Depth slider to control the amount of the Bulge."
HelpID('') ""
NameID('1Q07') "Remove Bulge"
DescID('1Q08') "The Remove Bulge brush is used to remove the Bulge brush effects you have drawn on your image. Brush over the affected area with the remove brush and the Bulge will melt away."
HelpID('') ""
NameID('1Q09') "Edge Nick"
DescID('1Q10') "The Edge Nick tool works best when drawn along the edge of an image and simulates the effect created when a photo-print or card stock is dented or worn by a hard object. To use this tool start drawing slightly outside the image or border and come into the image or border while running the cursor in parallel with the edge. After a short distance trace back outside again. Use the Edge Tool Depth, Edge Tool Scale and the Edge Tool Opacity sliders to control the Nick (make sure Global Slider Changes is checked on if you are adjusting the settings after you have drawn with the tool). Hold down the following modifier key and trace around a fray area to remove it: Mac: Option Key / Win: Alt Key. Adjustments to the lighting controls will affect the way you see the Edge Nick."
HelpID('') ""
NameID('1Q11') "Surface Crinkle"
DescID('1Q12') "The Surface Crinkle tool works best when you draw a straight line across the photo. It produces a raised ridge as if the paper had been folded and reflattened. Use the Edge Tool Depth, Edge Tool Scale and the Edge Tool Opacity sliders to control the Nick (make sure Global Slider Changes is checked on if you are adjusting the settings after you have drawn with the tool). Hold down the following modifier key and trace around a fray area to remove it: Mac: Option Key / Win: Alt Key. Adjustments to the lighting controls will affect the way you see the Surface Crinkle."
HelpID('') ""
NameID('1Q13') "Edge and Corner Crush"
DescID('1Q14') "The Edge and Corner Crush tool works best when drawn along the edge of an image or on a corner. It simulates the effect created when a photo is bent in on the sides or corner. To use this tool start drawing slightly outside the image or border and come into the image or border while running the cursor in parallel with the edge. After a short distance trace back outside again. Use the Edge Tool Depth, Edge Tool Scale and the Edge Tool Opacity sliders to control the this tool (make sure Global Slider Changes is checked on if you are adjusting the settings after you have drawn with the tool). Hold down the following modifier key and trace around the effect area to remove it: Mac: Option Key / Win: Alt Key. Adjustments to the lighting controls will affect the way you see the Edge and Corner Crush."
HelpID('') ""
NameID('1Q15') "Edge Tool Depth"
DescID('1Q16') "The Edge Tool Depth slider controls how deeply the Fray, Crumple, Edge Nick, Surface Crinkle and Edge and Corner Crush presses into the image."
HelpID('') ""
NameID('1Q17') "Edge Tool Scale"
DescID('1Q18') "Edge Tool Scale controls the scaling dimensions of the algorithms used to create the Fray, Crumple, Edge Nick, Surface Crinkle and Edge and Corner Crush effects."
HelpID('') ""
NameID('1Q19') "Edge Tool Opacity"
DescID('1Q20') "Edge Tool Opacity controls the intensity of the resulting changes to the image. A higher setting shows more change on the surface and edges where the effect is applied."
HelpID('') ""
NameID('1Q21') "Bulge Depth"
DescID('1Q22') "The Bulge Depth slider controls the depth the Add Bulge brush generates when drawn over an image."
HelpID('') ""
NameID('1Q23') "Global Slider Changes"
DescID('1Q24') "When the Global Slider Changes option is turned on the Edge Fray, Crumple Height and Crumple Size controls will change all pre-existing effects on a global basis. This means that if you have drawn lots of Edge Frays on the image and you want to tone them down some, you can check on this option and adjust all of them at the same time."
HelpID('') ""
NameID('1Q25') "Variation"
DescID('1Q26') "Variation controls the random generation of settings used to create each effect's distinctive patterns. Changing the Variation value for the effect will provide a unique look each time the setting is changed. In Photo Depth the Variation setting is used to generate unique patterns for Edge Fray, Crumple, Curl Shading, and the procedural Textures such as Dimpled and Striated."
HelpID('') ""
NameID('1R01') "Transform Focus Ellipse"
DescID('1R02') "Using the Transform Focus Ellipse tool you are able to move the Focus Ellipse by clicking over the center and dragging it. To rotate the direction of the focus place the cursor just outside the Ellipse and you will be given rotational control. To make the Focus Ellipse angle at a perspective adjust the outer path inward to shape the Focus into an oval. Adjust the inner Ellipse path to expand or contract the area that is in focus."
HelpID('') ""
NameID('1R03') "Create Focus Ellipse"
DescID('1R04') "Use the Create Focus Ellipse tool to create new Focus Ellipses. Click onscreen and a new Ellipse is generated under the cursor. By generating multiple Ellipses you can have multiple focal areas on your image."
HelpID('') ""
NameID('1R05') "Focal Center"
DescID('1R06') "When the Focus Type is set to either Zoom or Radial the Focal Center tool allows you click onscreen to set the center point where the zoom or radial draws within the Ellipse. When you click onscreen with this tool a Focal Center Point control is generated. The zoom and radial effects center on this point. You can click anywhere else on the screen to move the point or you can drag the point to a new location. This tool is only available when the Focus type is Zoom or Radial."
HelpID('') ""
NameID('1R07') "Remove Out of Focus Areas"
DescID('1R08') "The Remove Out of Focus Areas brush allows you to selectively remove areas that are out of focus and bring them into Focus. Use the Brush Opacity and Feather controls to set how strong the adjustment is and how smoothly it blends into the image."
HelpID('') ""
NameID('1R09') "Add Out of Focus Areas"
DescID('1R10') "The Add Out of Focus Areas brush allows you to selectively add areas that are out of focus. Use the Brush Opacity and Feather controls to set how strong the adjustment is and how smoothly it blends into the image."
HelpID('') ""
NameID('1111') "Delete Tool"
DescID('2222') "The Delete tool is used to delete effects, paths and ellipses. Select this tool and then click over the item you want to delete. When this tool is active you are shown all effect ellipses and paths from all tools you have used."
HelpID('') ""
NameID('1R11') "Focus Type"
DescID('1R12') "Use the Focus Type menu to choose from the different types of Focus effects. The currently selected Focus Ellipse will be changed to the type you select from this menu."
HelpID('') ""
NameID('1R13') "Radius Strength"
DescID('1R14') "The Radius Strength slider controls the strength of the Focus effect. Higher settings on this slider result in a stronger out of focus appearance across the Ellipse."
HelpID('') ""
NameID('1R15') "Opacity"
DescID('1R16') "Adjusting the opacity of the Focus lessens the effect overall."
HelpID('') ""
NameID('1R19') "Soften Mask"
DescID('1R20') "The Soften Mask slider allows the focus effect to blend from the background into the masked foreground image around the edges."
HelpID('') ""
NameID('1R17') "Invert Focus"
DescID('1R18') "When the Invert checkbox is on the focus effect is reversed inside the Ellipse going from out of focus in the center to in focus at the outside of the Ellipse."
HelpID('') ""
NameID('1R21') "Motion Direction"
DescID('1R22') "When the Focus Type is Directional Blur the Motion Direction control defines in the direction of the blur."
HelpID('') ""
NameID('U003') "Edit Menu"
DescID('U004') "The Edit menu provides access to the application preferences, bring objects to the front or send them to the back of a layer stack, inverse selections and clear selections."
HelpID('') ""
NameID('U005') "View Menu"
DescID('U006') "The View menu allows you to control the magnification of the preview area and what you see behind any selected areas in your effect. You can choose to view your image at a true 1:1 pixel aspect ratio by choosing Browser Dimensions. Use the view menu to show or hide selection lines."
HelpID('') ""
NameID('U011') "Special Effects Menu"
DescID('U012') "The Special Effects menu allows you to select the effect you want to apply to your artwork. You can switch between effects at anytime but you will loose any changes you have made each time you do so. All presets are saved and are loaded under the Special Effects menu next to the effect name they are created from. Selecting the submenu next to an effect name will display the list of presets available for that effect."
HelpID('') ""
NameID('U015') "Remove Preset Menu"
DescID('U016') "Use the Remove Preset menu to select the presets you no longer want. To remove a preset select it under the Remove Preset menu and it will be immediately and permanently deleted."
HelpID('') ""
NameID('U33 ') "Delay Time Menu"
DescID('U34 ') ""
HelpID('') ""
NameID('MRMN') "Reflection Map Menu"
DescID('MRMQ') "The Reflection Map menu allows you to select different image reflection maps that form the color and reflective qualities of the depth effect. You may load a custom map of your own design (try any textured image) by choosing Custom Map from the menu. Use the arrows at the top and bottom of the menu to scroll through the pre-installed maps."
HelpID('') ""
NameID('1DIW') "Rotate Surface Map"
DescID('MRSQ') "The Surface Map Orientation menu allows you to rotate the map direction in specified directional increments. You may also flip the orientation horizontally or vertically."
HelpID('') ""
NameID('SHit') "Show/Hide Tool Tip"
DescID('SHiT') ""
HelpID('') ""
NameID('1P13') "Fold Width"
DescID('1P14') "The Fold Width slider defines the width for the Curl, Crease, Crumple and Fold tools. The higher the setting the wider and smoother the shading is applied across the effect. Use the width to make fold and creases sharper or smoother."
HelpID('') ""
NameID('1P15') "Frequency"
DescID('1P16') "The Frequency slider adjusts the size of the wrinkles that are generated along the sides of a fold."
HelpID('') ""
NameID('1P17') "End Taper"
DescID('1P18') "The End Taper slider reduces the fold depth near the ends of the path. Setting this control at higher amounts reduces the amount of dimple or bend that is generated along the fold path. This is useful for creating folds in the middle of a documnent without having a dimple or bend generated."
HelpID('') ""
NameID('1P19') "Crumple"
DescID('1P20') "The Crumple slider controls how much of a crumple is applied to the currently selected path. This control produces a slight visual effect with Curl, Crease and Fold paths and a major effect with the Crumple path."
HelpID('') ""
NameID('1P21') "Crease Bumps"
DescID('1P22') "The Crease Bumps slider adds a slight visual enhancement to the folds and creases showing irregularities where the fold has occurred."
HelpID('') ""
NameID('1P23') "Image Distortion"
DescID('1P24') "The Image Distortion slider control defines how much the image is distorted along the crease or fold."
HelpID('') ""
NameID('1P09') "Orientation Menu"
DescID('1P10') "The Orientation menu allows you to choose the orientation of Curl, Crease and Fold effects. You may choose a downward or upward orientation. First, select a path and then change the orientation by using this menu."
HelpID('') ""
NameID('1P11') "Fold Depth"
DescID('1P12') "The Fold Depth slider defines the shading depth for the Curl, Crease, Crumple and Fold tools. The higher the setting the more depth shading and distortion is applied to the effect."
HelpID('') ""
NameID('1P05') "Crumple"
DescID('1P06') "Use this tool to create crumples and small surface distortions on your image. Click and drag this tool across your image to create the crumple path. Use the Crumple slider to adjust the strength of the crumple paths. To draw a freehand path with this tool, turn off the Straight Path checkbox."
HelpID('') ""
NameID('1P07') "Fold"
DescID('1P08') "Use the Fold tool to create a bend and fold effect. Click and drag this tool across your image to create the fold path. To draw a freehand path with this tool, turn off the Straight Path checkbox."
HelpID('') ""
NameID('1P01') "Curl"
DescID('1P02') "Use the Curl tool to curl the photo corners in either an upward or downward direction. The direction for this effect is set by the Orientation Menu. Click and drag this tool across a corner to draw a curl path. Click and drag over an end point on the path to adjust the length or direction of the path. To draw a freehand path with this tool, turn off the Straight Path checkbox."
HelpID('') ""
NameID('1P03') "Crease"
DescID('1P04') "Use the Crease tool to create crease lines on your image. Crease lines can be generated in either an upward or downward direction depending on the Orientation settings. Click and drag this tool across your image to create the crease path. To draw a straight crease hold down the Shift key and the path will be constrained to a straight line. Alternatively you may turn on the Draw Straight Line checkbox."
HelpID('') ""
NameID('1O21') "Crack Alignment"
DescID('1O22') "The Crack Alignment slider makes the cracks align more in a vertical and horizontal pattern simulating a painting that has been rolled up and unrolled numerous times forming cracks of this nature."
HelpID('') ""
NameID('1O25') "Flake Shows Imprint"
DescID('1O26') "When the Flake Shows Imprint option is on any flakes you draw on your image using the Flake Crack tool will leave a slight ghost of an image imprinted on the surface."
HelpID('') ""
NameID('1O23') "Variation"
DescID('1O24') "Variation controls the random generation of settings used to create each effect's distinctive patterns. Changing the Variation value for the effect will provide a unique look each time the setting is changed. In Crackle the Variation setting is used to generate unique paths followed by the cracks, the undulations for the Curling and the pattern exposed when flaking occurs."
HelpID('') ""
NameID('MSMN') "Surface Map Menu"
DescID('MSMQ') "The Surface Map menu allows you to select from a variety of surfaces for your effect. Surface Maps change the height of the surface with a texture or bump. This alters the direction of light reflected by Sheen and Reflective, and the light bent by Refractive. You may load a custom map by choosing Custom Map from the menu. Use the arrows at the top and bottom of the menu to scroll through the pre-installed maps. If you decide you no longer want the surface map, select the None option from the menu."
HelpID('') ""
NameID('100A') "Outside Edge Tool"
DescID('100B') "The Outside Edge tool allows you to Select, Move, Scale, Stretch and Rotate edge effects. It is also allows you to target and control any edge that you have loaded up onscreen."
HelpID('') ""
NameID('101A') "Clone Edge"
DescID('101B') "The Clone Edge tool is used to create new edges that are based on the currently selected edge. Cloned edges are used to change the shape of the Outside and Inside edges.Use the Outside Edge tool to select an effect, then click on the Clone Edge tool and click onscreen with this tool."
HelpID('') ""
NameID('102A') "Inside Edge Tool"
DescID('102B') "The Inside Edge tool works exactly like the Outside Edge tool insofar as it allows you to Select, Move, Scale, Stretch and Rotate an edge effect. It also allows you to target and control any edge that you have loaded up onscreen."
HelpID('') ""
NameID('103A') "Select Outside / Select Inside EdgeMenu"
DescID('103B') "Depending on which Edge tool is currently active, this menu allows you to load either an Outside or an Inside Edge. When you pull down this menu you will see Load from Catalog or Load from Finder. If you select Load from Catalog you will be able to pull up a window that displays all the edges found in the current directory. If you select Load from Finder you are presented with a standard navigation menu whereby you may locate and load an effect."
HelpID('') ""
NameID('104A') "Selected Edge"
DescID('104B') "The edge number that you have selected will be displayed here.."
HelpID('') ""
NameID('105A') "Edge Softness"
DescID('105B') "This slider will soften the edge. Increasing the setting will blend the edge through a soft inward and outward fade."
HelpID('') ""
NameID('106A') "Feather"
DescID('106B') "The Feather slider blends the edge inward with a smooth gradient feather.."
HelpID('') ""
NameID('107A') "Opacity"
DescID('107B') "The Opacity slider reduces the overall opacity of both the image and the effect."
HelpID('') ""
NameID('108A') "Roughen Menu"
DescID('108B') "Use the Roughen menu to select a pattern that will be used to roughen and reshape the edge. The Size and Strength sliders control how much roughness is used."
HelpID('') ""
NameID('109A') "Size"
DescID('109B') "The Size slider adjusts the size of the roughness as it is applied to the edge effect."
HelpID('') ""
NameID('110A') "Border Color"
DescID('110B') "The Border Color slider controls the color and the opacity of the Outside Edge. This control is used when both an Outside and an Inside Edge are loaded."
HelpID('') ""
NameID('111A') "Curl Shading"
DescID('111B') "Curl shading adds a light wrinkled surface shading to the image and edge effect. As you adjust the lights on the Light Tab you will see the Curl Shading change."
HelpID('') ""
NameID('112A') "Variation"
DescID('112B') "The Variation slider changes the wrinkle surface pattern used by the Curl Shadingcontrol."
HelpID('') ""
NameID('113A') "Strength"
DescID('113B') "The Strength slider will increase the amount of roughness that is applied to the edge effect"
HelpID('') ""
NameID('114A') "Clone Edge"
DescID('114B') "The Clone Edge tool is used to create an exact copy of the icon inside the photo window. A small dialog window appears asking currently selected edge. You may then modify this copy bychanging the edge and any settings. Use the Outside Edge tool to select an effect, then click on the Clone Edge tool and click onscreen with this tool and a copy of the currently selected edge will be cloned. Use the Inside Edge tool to transform the photo and any Inside Edges you have loaded up on the photo."
HelpID('') ""
NameID('115A') "Inside Edge Tool"
DescID('115B') "The Inside Edge tool allows you to Select, Move, Scale, Stretch and Rotate both the photo inside the edge effect. If you do not have an inside edge loaded up, the transform functions change the photo only as it has no edge around it. Using the Inside Edge tool you can manipulate just the photo and not the Outside Edge. Once you loadup an Inside Edge you will transform both the photo and the Inside Edge at the same time."
HelpID('') ""
NameID('116A') "Place Photo Tool"
DescID('116B') "The Place Photo tool allows you to place a new photo inside the selected effect. Click to activate the place photo tool then move it over the target effect area and you will see the photo window highlight.The cursor will change to a small camera icon. Click with this icon inside the photo window. A small dialog window appears asking you to load the photo. This menu also lets you go back and use theoriginal photo for that effect."
HelpID('') ""
NameID('117A') "Delete Edge"
DescID('117B') "Select the Trash can icon and then click over any edge in the effect and it will be deleted."
HelpID('') ""
NameID('118A') "Select Outside / Select Inside Edge Menu"
DescID('118B') "Depending on which Edge tool is currently active, this menu allows you to load either an Outside or an Inside Edge. When you pull down this menu you will see Load from Catalog or Load from Finder. If you select Load from Catalog you will be able to pull up a window that displays all the edges found in the current directory.If you select Load from Finder you are presented with a standard navigation menu whereby you may locate and load an effect."
HelpID('') ""
NameID('119A') "Selected Edge"
DescID('119B') "The edge number that you have selected will be displayed here."
HelpID('') ""
NameID('120A') "Outside Edge Tool"
DescID('120B') "The Outside Edge tool allows you to Select, Move, Scale, Stretch and Rotate edge effects. It is also allows you to target and control any edge that you have loaded up onscreen."
HelpID('') ""
NameID('121A') "Edge Softness"
DescID('121B') "This slider will soften the edge. Increasing the setting will blend the edge through a soft inward and outward fade."
HelpID('') ""
NameID('122A') "Feather"
DescID('122B') "The Feather slider blends the edge inward with a smooth gradient feather."
HelpID('') ""
NameID('123A') "Opacity"
DescID('123B') " The Opacity slider reduces the overall opacity of both the image and the effect."
HelpID('') ""
NameID('124A') "Roughen Menu"
DescID('124B') "Use the Roughen menu to select a pattern that will be used to roughen and reshape the edge. The Size and Strength sliders control how much roughness is used."
HelpID('') ""
NameID('125A') "Size"
DescID('125B') "The Size slider adjusts the size of the roughness as it is applied to the edge effect."
HelpID('') ""
NameID('126A') "Strength"
DescID('126B') "The Strength slider will increase the amount of roughness that is applied to the edge effect The Strength slider will increase the amount of roughness that is applied to the edge effect"
HelpID('') ""
NameID('127A') "Border Color"
DescID('127B') "The Border Color slider controls the color and the opacity of the Outside Edge. This control is used when both an Outside and an Inside Edge are loaded."
HelpID('') ""
NameID('128A') "Curl Shading"
DescID('128B') "Curl shading adds a light wrinkled surface shading to the image and edge effect. As you adjust the lights on the Light Tab you will see the Curl Shading change."
HelpID('') ""
NameID('129A') "Variation"
DescID('129B') "The Variation slider changes the wrinkle surface pattern used by the Curl Shadingcontrol."
HelpID('') ""
NameID('130A') "V i g n e t t e T o o l"
DescID('130B') "The Vignette tool allows you to Select, Move, Scale, Stretch and Rotate vignette effects. It is also allows you to target and control any edge that you have loaded up onscreen."
HelpID('') ""
NameID('131A') "Clone Vignette"
DescID('131B') "The Clone Vignette tool is used to create new Vignettes that are based on the currently selected vignette. Cloned vignettes blend their shape into the underlying vignettes. Use the Vignette tool to select a vignette, then click on the Clone Vignette tool and click onscreen with this tool."
HelpID('') ""
NameID('132A') "Blend Tool"
DescID('132B') "The Blend tool allows you to add a gradient directional feather using a straight path tool. With this tool active click onscreen to place the starting point and click to place the ending point. Once the path is drawn onscreen you can adjust it by clicking on either end point and then moving it to a new location. "
HelpID('') ""
NameID('133A') "D e l e t e T o o l"
DescID('133B') "Select the Trash can icon and then move the cursor over any vignette or blend tool path in the document and it will highlight. Click with the trash tool to remove the item you have selected."
HelpID('') ""
NameID('134A') "Shape Type Menu"
DescID('134B') "Using the Shape Type menu you are able to select from a wide variety of shapes that feather your image. The default shape type is ellipse."
HelpID('') ""
NameID('135A') "Streak Menu"
DescID('135B') "The Vignette in Photo/Graphic Edges allows you to add unique streaks to the edges of the feathered areas of the vignettes. Use the Roughen menu to select a pattern that is used to generate these streaks."
HelpID('') ""
NameID('136A') "S t r e a k D i r e c t i o n"
DescID('136B') "The Streak Direction control allows you to set the direction in which the streaks travel as they are generated along the edges of the vignette. Move the circle on this control in the direction that you want the streak to travel in."
HelpID('') ""
NameID('137A') "S t r e a k S i z e"
DescID('137B') "The Streak Size control defines how large the streaking pattern becomes as it is applied to the vignette."
HelpID('') ""
NameID('138A') "Distance"
DescID('138B') "The Distance slider defines how far the streaks will move in an outward direction from the edges of the vignette."
HelpID('') ""
NameID('139A') "Softness"
DescID('139B') "The Softness slider will blend in the streak pattern as it is applied to the vignette. A softer pattern will often be less noticible. Lower settings with this slider generate the best results."
HelpID('') ""
NameID('140A') "Feather Radius"
DescID('140B') "The Feather Radius slider is one of the most important controls in the Vignette effect. It will define the distance the feather will travel inward from the edges of your image. The higher the setting, the farther the feather travels inward and the softer the outer edges become."
HelpID('') ""
NameID('141A') "Feather Opacity"
DescID('141B') "The Feather Opacity reduces the overall opacity of the entire image and the feather that is applid to it."
HelpID('') ""
NameID('142A') "Frames Tool"
DescID('142B') "The Transform Effect tool allows you to Select, Move, Scale, Stretch and Rotate frames."
HelpID('') ""
NameID('143A') "Place Photo Tool"
DescID('143B') "The Place Photo tool allows you to place a new photo inside.the selected effect. Click to activate the place photo tool then move it over the target effect area and you will see the photo window highlight. The cursor will change to a small camera icon. Click with this icon inside the photo window. A small dialog window appears asking you to load the photo. This menu also lets you go back and use the original photo for that effect."
HelpID('') ""
NameID('144A') "Transform Photo"
DescID('144B') "The Transform Photo tool allows you to Select, Move, Scale, Stretch and Rotate the photo inside the effect. Using the Transform Photo tool you can manipulate just the photo and not the frame around it.This tool is useful for when you have loaded up a photo into a frame and need to adjust it and not the frame itself."
HelpID('') ""
NameID('145A') "Place Focus Ellipse"
DescID('145B') "The Place Focus Ellipse tool enables you to create an onscreen ellipse that generates a soft focus effect on your framed image. To use this tool select the tool to make it active then click onscreen.An ellipse will show up wherever you click with this tool. Use the Transform Focal Ellipse tool to adjust this ellipse into the correct position. Adjust the Focal Radius and Focal Opacity sliders to control the blending and visible degree of the focus as it is applied to your image through the ellipse."
HelpID('') ""
NameID('146A') "Transform Focus Ellipse"
DescID('146B') "The Transform Focal Ellipse tool is used to adjust the Focus Ellipse you create with the Place Focus Ellipse tool. Once you have a Focus Ellipse onscreen click this tool and then move the cursor over the ellipse. As you move the cursor over the ellipse you will see it change to show different transformation and movement icons. Each of these icons represents a method of adjusting the ellipse and are visually selfexplanatory."
HelpID('') ""
NameID('147A') "Delete Focal Ellipse"
DescID('147B') "The Delete Focal Ellipse control is used to remove unwanted focal ellipses from your effect. Select this tool and then move the cursor over the are the ellipse is in. The ellipse will highlight to indicate it is the selected ellipse. Click on the ellipse and it will be removed."
HelpID('') ""
NameID('148A') "Select Frame Effect Menu"
DescID('148B') "When you pull down this menu you will see Catalog or Open Dialog. If you selectCatalog you will be able to pull up a window that displays thumbnails of all the edges found in the current directory. If you select Open Dialog you are presented with a standard navigation menu whereby you may locate and load an effect."
HelpID('') ""
NameID('149A') "Focal Radius"
DescID('149B') "This control is used when you have created a Focus Ellipse and are applying a focus effect to your image inside the frame. The Focal Radius controls how strong the focus effect is as it is applied across the ellipse onto the photo."
HelpID('') ""
NameID('150A') "Focal Opacity"
DescID('150B') "The Focal Opacity increases or reduces the overall amount that the focus is seen on the image. The lower the settings on this slider, the less you will notice the focus."
HelpID('') ""
NameID('151A') "Curl Shading"
DescID('151B') "Curl shading adds a light wrinkled surface shading to the image and edge effect. As you adjust the lights on the Light Tab you will see the Curl Shading change."
HelpID('') ""
NameID('152A') "V a r i a t i o n"
DescID('152B') "The Variation slider changes the wrinkle surface pattern used by the Curl Shading control."
HelpID('') ""
NameID('153A') "Target Menu"
DescID('153B') "The Target Menu allows you to define where you want the surface controls to be applied to. You may select Background or fill another aspect of the effect."
HelpID('') ""
NameID('154A') "F i l l W i t h M e n u"
DescID('154B') "This menu allows you to select what you want to use when filling the Target. Your choices are None, Color and Texture. None will remove any color or texture you have applied. Color will fill the target with the default color. Click on the Fill Color box to activate the color picker and allow you to select a color to be used as the fill. Texture will activate the Open Dialog and allow you to select an image to be filled into the Target. PGE ships with texture mattes that you may select or you may choose any file of your own. Note: If you have selected Fill With Color the Texture controls are grayed out. If you have selected Fill With Texture, the Fill Color control is grayed out."
HelpID('') ""
NameID('155A') "F i l l C o l o r"
DescID('155B') "When you have selected Fill With: Color, you are able to adjust the color using this tool. Click on the color box to activate the color picker. Select a color in the color picker then press OK and the selected color will be used. Adjust the Fill Color slider to reduce the opacity of the color from 100% opaque to semi-transparent. As you move the slider to the left the color becomes semi-transparent."
HelpID('') ""
NameID('156A') " Opacity"
DescID('156B') "This controls the opacity of any Texture you are filling with. Moving the slider to the left makes the texture semitransparent."
HelpID('') ""
NameID('157A') "Hue"
DescID('157B') "The Hue color slider shifts the color values of the texture across a color spectrum. This control allows you to shift the colors of the texture while not affecting the lightness or saturation. "
HelpID('') ""
NameID('158A') "S a t u r a t i o n"
DescID('158B') "The Saturation slider makes the colors in the texture more or less vibrant. This control is useful for making the textureís colors pop while not affecting the overall tone or lightness."
HelpID('') ""
NameID('159A') "Luminance"
DescID('159B') "The Luminance slider adjusts the luminance or "light" qualities in a texture file to either darken or lighten the image."
HelpID('') ""
NameID('160A') "Softness"
DescID('160B') "The Softness slider will soften the selected texture making it look out of focus."
HelpID('') ""
NameID('161A') "T e x t u r e O r i e n t a t i o n"
DescID('161B') "The Texture Orientation menu allows you to rotate the texture in specified directional increments. You may also flip the orientation horizontally or vertically."
HelpID('') ""
NameID('162A') "Surface Map Orientation"
DescID('162B') "The Surface Map Orientation menu allows you to rotate the texture map direction in specified directional increments. You may also flip the orientation horizontally or vertically."
HelpID('') ""
NameID('163A') "L i g h t T i l e M e n u"
DescID('163B') "The Light Tile Menu allows you to load up a light tile from the Open Dialog. You may also decide not to use a light time and if so, you may remove it by selecting None from this menu."
HelpID('') ""
NameID('164A') "Opacity"
DescID('164B') "The light tile will apply a shading mask to the image that may be too dark for your needs. If it is too dark, adjust this control to reduce the opacity of the light tile as it is applied to your effect. The result is a lighter, less noticible application of the tile."
HelpID('') ""
NameID('165A') "Softness"
DescID('165B') "The Softness slider will soften the light tile to smooth it out as it is applied. In some cases, depending on the tile selected and settings of the softness control, the results can be very noticible. In most cases, however, the result of using the softness control are subtle."
HelpID('') ""
NameID('166A') "Light Tile Orientation Menu"
DescID('166B') "The Light Tile Orientation menu allows you to rotate the light tile in specified directional increments. You may also flip the orientation horizontally or vertically. A useful technique to learn is to apply the same light tile to the background as you apply to the effect but with different orientations and opacity settings. This allows the shading to remain similar yet from a different orientation and opacity (strength). The edge seperates the foreground from the background and is accented by the Light Tile shading."
HelpID('') ""
NameID('167A') "SpotLight Checkbox"
DescID('167B') "Check this option on to convert the selected Light Point into a Spot Light Point. Uncheck this option to convert the selected Spot Light back into a Light Point. Spot Lights cast soft circular shapes of light directly over the graphic and helps you shade it. Use the Feather, Spotlight Size and Light Color controls to enhance a Spot Light Point."
HelpID('') ""
NameID('168A') "Feather"
DescID('168B') "The Feather slider will control the softness of the spotlight. Lower settings make the spotlight have a harsher, more intense feel to them. Higher slider settings make the spotlight softer, less intense and spreads the simulated light out in a more gradual manner."
HelpID('') ""
NameID('169A') "SpotLight Size"
DescID('169B') "The Spotlight Size slider controls how large of a circumference the spotlight will spread out to cover the area it is centered on."
HelpID('') ""


// Gel Descriptions & Explanations
NameID('B00A') "Bulge Brush"
DescID('B00B') "The Bulge Brush will add localized depth to the effect by raising the depth height wherever it is brushed. Use the Brush Opacity, Size and Feather controls to further enhance the Bulge Brush attributes."
HelpID('') ""
NameID('B01A') "Splatter Brush"
DescID('B01B') "Draw with the Splatter brush to create splats of gel along the path. Random splatter shapes will be generated as you draw. Use the Brush Opacity, Size and Feather controls to adjust the splats. Remove splats with the Remove Brush."
HelpID('') ""
NameID('B02A') "Indent Brush"
DescID('B02B') "The Indent Brush will add localized depth indentations to the effect by pushing in the effect wherever it is brushed. Use the Brush Opacity, Size and Feather controls to further enhance the Indent Brush attributes."
HelpID('') ""
NameID('B03A') "Add Brush"
DescID('B03B') "The Add Brush will draw the effect from its nozzle using the current slider and menu settings."
HelpID('') ""
NameID('B04A') "Remove Brush"
DescID('B04B') "The Remove Brush will remove the effect that it is brushed over."
HelpID('') ""
NameID('B05A') "Brush Opacity"
DescID('B05B') "Click on this vertical slider area to access the brush opacity control. As you adjust the opacity control you will be shown a brush attributes window. The brush attributes window displays the actual size, opacity and feather attributes of the brush as they will be applied when you brush."
HelpID('') ""
NameID('B06A') "Brush Size"
DescID('B06B') "Click on this small horizontal slider to access the brush size control. As you adjust the size control you will be shown a brush attributes window. The brush attributes window displays the actual size, opacity and feather attributes of the brust as they will be applied when you brush."
HelpID('') ""
NameID('B07A') "Brush Feather"
DescID('B07B') "Click on this small vertical slider to access the brush feather control. As you adjust the feather control you will be shown a brush attributes window. The brush attributes window displays the actual size, opacity and feather attributes of the brush as they will be applied when you brush."
HelpID('') ""
NameID('B08A') "Edge Radius"
DescID('B08B') "The Edge Radius slider adjusts the angle and sharpness of the bevel edge. Use this control with Polish Curvature and Bevel Depth sliders to refine the look of the depth effect."
HelpID('') ""
NameID('B09A') "Depth"
DescID('B09B') "The Depth slider changes the height of the bevel. Stronger settings make the bevel appear to have more height and depth. Use this control with the Edge Radius and Polish Curvature sliders to refine the look of the depth effect."
HelpID('') ""
NameID('B10A') "Gel Color"
DescID('B10B') "The Gel color control allows you to control the color and opacity of the gel effect. Reduce the slider to reduce the opacity of the gel. Click on the color box to gain access to the color picker."
HelpID('') ""
NameID('B11A') "Refractive"
DescID('B11B') "The Refractive slider is used to pull the image into the depth to to refract it inside the bevel shape. Typically, lower settings with this slider yield the best results."
HelpID('') ""
NameID('B12A') "Polish Curvature"
DescID('B12B') "The Polish Curvature slider rounds and smoothes the angles of the bevel making them softer with gentle curves versus sharp angles. Use this control with the Edge Radius and Bevel Depth sliders to refine the look of the depth effect."
HelpID('') ""
NameID('B13A') "Transparent Image Checkbox"
DescID('B13B') "If you desire the effect to treat the artwork as if it were a transparent selection, then check this option on. This is useful if you have type on a layer and desire to use the shape of the type, but avoid using the color (black type, for example, influences the color of the gel that is on top of it). By checking this option on, the shape of the artwork is used and not the contents inside the shape."
HelpID('') ""
NameID('B14A') "Soften Mask Checkbox"
DescID('B14B') "When this option is on the shape of the artwork is slightly softened. This will give the bevel shape a softer appearance around the edges."
HelpID('') ""
NameID('B15A') "Shield Transparency"
DescID('B15B') "When the Shield Transparency option is checked the effect will only apply to the pixels on the layer and will not affect the transparent areas. Checking this option will change how Dreamsuite applies the effect around a selection or on artwork on a layer."
HelpID('') ""
NameID('B16A') "Apply Background Image"
DescID('B16B') "When the Apply Background Image option is on the background image behind the selection will show up in the preview and will also apply as part of the effect."
HelpID('') ""

// Gel Mixer Descriptions & Explanations - uses repeat descriptions from Gel (above)
NameID('B17A') "Auto Fill"
DescID('B17B') "Gel Mixer will automatically mix together Gel 1 and Gel 2 when you press this button. Use the Fill Volume and Clear button along with this control."
HelpID('') ""
NameID('B18A') "Clear"
DescID('B18B') "This button removes the Auto Mixed gels and lets you start again fresh."
HelpID('') ""
NameID('B19A') "Fill Volume"
DescID('B19B') "The Fill Volume slider controls how much of Gel 2 will be placed inside Gel 1 when you use the Auto Fill option."
HelpID('') ""
NameID('B20A') "Gel"
DescID('B20B') "The Gel menu allows you to select the current gel the controls work with. Use this menu to select the gel you desire to paint with. All changes you make to the controls will adjust the currently selected gel attributes and will automatically update the effect wherever you have used the gel."
HelpID('') ""
NameID('B21A') "New Gel"
DescID('B21B') "Gel Mixer allows you to have as many different gel surfaces as you want. Click this button to create a new gel that will appear under the Gel Menu. After you have created the new Gel you can select this from the Gel menu and then change the attributes (Gel Color, texture maps, etc.) that the Gel uses when rendering."
HelpID('') ""

// Gel Painter Descriptions & Explanations - uses repeat descriptions from Gel (above)
NameID('B22A') "Add Image Color Brush"
DescID('B22B') "Use this brush to paint under the gel onto the background. The brush applies a color that is shown through the gel. You will see how the Gel depth will bend and refract the colors into the depth of the effect. If you want to apply the gel to just the area beneath the selection, uncheck the Apply Background Image option and the Gel will be contained inside the selected areas. Use the brush controls to define the opacity, size and feather of this brush. You should note that as the color is applied under the gel effect, it will change in appearance as if it were seen through a colored piece of glass. Some experimentation may be required to get the desired color due to the photo-realistic nature of how this effect is generated."
HelpID('') ""
NameID('B23A') "Remove Image Color Brush"
DescID('B23B') "Use this brush to remove any paint you have applied using the Add Image Color Brush tool. It will remove the areas as you brush over. Use the brush controls to define the opacity, size and feather of this brush."
HelpID('') ""
NameID('B24A') "Add Surface Color Brush"
DescID('B24B') "Use this brush to paint onto the surface of the gel. The brush applies a color that is shown on top of the gel. You will see the color bend with the curvature of the depth from the surface as the bevel shapes the depth. If you want to apply the gel to just the gel selection, uncheck the Apply Background Image option and the Gel will be contained inside the selected areas. Use the brush controls to define the opacity, size and feather of this brush. You should note that as the color is applied on the surface of the gel effect it will change in appearance as it mixes with the color of the gel surface."
HelpID('') ""
NameID('B25A') "Remove Surface Color Brush"
DescID('B25B') "Use this brush to remove any paint you have applied using the Add Surface Color Brush tool. It will remove the areas as you brush over. Use the brush controls to define the opacity, size and feather of this brush."
HelpID('') ""
NameID('B26A') "Image Color"
DescID('B26B') "The Image Color Brush color and opacity is set with this control. Lower slider settings apply less of the color while higher settings apply more of the selected color. Use the color box adjacent to the slider to define the color. Click on the color chip and the color picker will appear."
HelpID('') ""
NameID('B27A') "Surface Color"
DescID('B27B') "The Surface Color Brush color and opacity is set with this control. Lower slider settings apply less of the color while higher settings apply more of the selected color. Use the color box adjacent to the slider to define the color. Click on the color chip and the color picker will appear."
HelpID('') ""

// Crystal Painter descriptions & Explanations - uses repeat ids from Gel effects (above)
NameID('B28A') "Add Image Color Brush"
DescID('B28B') "Use this brush to paint under the crystal onto the background. The brush applies a color that is shown through the crystal. You will see how the Crystal depth will bend and refract the colors into the depth of the effect. If you want to apply the crystal to just the area beneath the selection, uncheck the Apply Background Image option and the Crystal will be contained inside the selected areas. Use the brush controls to define the opacity, size and feather of this brush. You should note that as the color is applied under the Crystal effect, it will change in appearance as if it were seen through a clear piece of glass with reflections on it. Typically, you should select a darker color than you desire to see on your artwork as colors lighten as they are refracted through the crystal."
HelpID('') ""
NameID('B29A') "Add Surface Color Brush"
DescID('B29B') "Use this brush to paint onto the surface of the Crystal. The brush applies a color that is shown on top of the crystal. You will see the color bend with the curvature of the depth from the surface as the bevel shapes the depth. If you want to apply the color to just the Crystal selection, uncheck the Apply Background Image option and the Gel will be contained inside the selected areas. Use the brush controls to define the opacity, size and feather of this brush."
HelpID('') ""
NameID('B30A') "Remove Image Color Brush"
DescID('B30B') "Use this brush to remove any paint you have applied using the Add Image Color Brush tool. It will remove the areas as you brush over. Use the brush controls to define the opacity, size and feather of this brush."
HelpID('') ""
NameID('B31A') "Remove Surface Color Brush"
DescID('B31B') "Use this brush to remove any paint you have applied using the Add Surface Color Brush tool. It will remove the areas as you brush over. Use the brush controls to define the opacity, size and feather of this brush."
HelpID('') ""
NameID('B32A') "Image Color"
DescID('B32B') "The Image Color Brush color and opacity is set with this control. Lower slider settings apply less of the color while higher settings apply more of the selected color. Use the color box adjacent to the slider to define the color. Click on the color chip and the color picker will appear. Typically you should select a darker color than you desire to see on your artwork as colors lighten as they are refracted through the crystal."
HelpID('') ""
NameID('B33A') "Surface Color"
DescID('B33B') "The Surface Color Brush color and opacity is set with this control. Lower slider settings apply less of the color while higher settings apply more of the selected color. Use the color box adjacent to the slider to define the color. Click on the color chip and the color picker will appear."
HelpID('') ""
NameID('B34A') "Add Texture Brush"
DescID('B34B') "As you brush with the Add Texture Brush, the currently selected texture and control settings are used. Each time you adjust the controls, it will affect the next brush application you do. To remove a brush stroke, use the Remove Texture Brush. Use the brush controls to define the opacity, size and feather of this brush."
HelpID('') ""
NameID('B35A') "Remove Texture Brush"
DescID('B35B') "Use this brush to remove and textures you have applied using the Add Texture Brush tool. It will remove the areas as you brush over. Use the brush controls to define the opacity, size and feather of this brush."
HelpID('') ""
NameID('B36A') "Global Checkbox"
DescID('B36B') "Checking this option on will apply any control adjustment to all brush strokes you make next. It will not apply these adjustments to any brush stroke you have previously made."
HelpID('') ""


Done

END